|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：工程力学. 计算力学. 航空航天力学与工程
办公地点：综合实验I号楼 512
扫描关注
- [221]李明丽, 高仁璟, 刘书田.Modeling, analysis and validation of a novel asymmetric cruciform harvester with d15 mode[J],Smart materials and Structures,2021,29((2)):25014-25026
- [222]罗云峰, 胡靖宇, 刘书田.Self-connected multi-domain topology optimization of structures with multiple dissimilar microstr...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2021
- [223]史鹏飞, 高仁璟, 刘书田.Enhanced transmission through sub-wavelength aperture in specific frequency band by using topolog...[J],Optics Express,2021,28(21):30340-31780
- [224]高仁璟, 汤易, 王奇, 刘书田.Pattern synthesis considering mutual coupling for peak sidelobe suppression and null controlling ...[J],ENGINEERING OPTIMIZATION,2021
- [225]田香玉, 陈文炯, 高仁璟, 刘书田.CLUSTERING BASED THREE-SCALE CONCURRENT TOPOLOGY OPTIMIZATION WITH MACROSTRUCTURE[J],Applied Physics Express,2021,13(4):45503-
- [226]Wang, Yan-Xia, Xiang, Cheng, 刘波, 朱勇, Luan, Yong, 刘书田, 覃开蓉.A multi-component parallel-plate flow chamber system for studying the effect of exercise-induce...[J],BIOMEDICAL ENGINEERING ONLINE,2021,15(Suppl 2):154
- [227]Luo, Yunfeng, Chen, Wenjiong, Liu, Shutian, Li, Quhao, Ma, Yaohui, ST (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..A discrete-continuous parameterization (DCP) for concurrent optimization of structural topologi...[J],COMPOSITE STRUCTURES,2020,236
- [228]Li, Mingli, Liu, Shutian, Tong, Liyong, Gao, Renjing, RJ (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Analysis and test of a novel pre-compressed cruciform energy harvester[J],SENSORS AND ACTUATORS A-PHYSICAL,2020,302
- [229]Kong, Dekui, Zhang, Yongcun, Liu, Shutian, YC (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Convective heat transfer enhancement by novel honeycomb-core in sandwich panel exchanger fabric...[J],APPLIED THERMAL ENGINEERING,2019,163
- [230]Li, Quhao, Xu, Rui, Liu, Ji, Shutian, Zhang, Song, ST (reprint author), Dalian Univ Technol, Dalian 116024, Peoples R China., Zhang, S (reprint author), Shandong Univ, Jinan 250061, Shandong.Topology optimization design of multi-scale structures with alterable microstructural length-wi...[J],COMPOSITE STRUCTURES,2019,230
- [231]张永存, 马广朋, 王佳优, 刘书田, 康帅帅.Numerical and experimental study of phase-change temperature controller containing gradient cellu...[J],Applied Thermal Engineering,2019,150(1):1297-1305
- [232]童泽奇, 刘杨, 刘书田.面向变厚度柔性轧制工艺的帽型梁横向冲击吸能优化设计[J],力学学报,2018,51(2):462-472
- [233]吴书豪, 张永存, 刘书田.一种考虑瞬态效应的散热结构导热路径设计的拓扑优化模型[J],计算力学学报,2018,35(5):547-551
- [234]Ding, Xueshan, Tong, Zeqi, Liu, Yang, Shutian, ST (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Dynamic axial crush analysis and design optimization of a square multi-cell thin-walled tube wi...[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2018,140:13-26
- [235]Gao, Renjing, Li, Mingli, Zhao, Jian, Liu, Shutian, Wang, Qi, J, Liu, ST (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..A novel design method of bistable structures with required snap-through properties[J],SENSORS AND ACTUATORS A-PHYSICAL,2018,272:295-300
- [236]罗云锋, 刘书田.Topology Optimization Method of Structures Considering the Boundary Layer Coated by Functionally ...[A],2018
- [237]高仁璟, 刘川, 王奇, 刘书田.Topology and Shape Optimization Based Method for Miniaturization Design of Metallic Antenna[A],2018
- [238]陈文炯, 任春晶, 刘书田.Design Optimization of Underwater Acoustic Anechoic Layers Under Set Frequency Bands[A],2018
- [239]范慧茹, 刘书田, 罗云锋.Robust Topology Optimization of Additive Manufacturing Structures with Consideration of Manufactu...[A],2018
- [240]Li, Quhao, Chen, Wenjiong, Liu, Shutian, Fan, Huiru, ST (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Topology optimization design of cast parts based on virtual temperature method[J],COMPUTER-AIDED DESIGN,2018,94:28-40