|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：工程力学. 计算力学. 航空航天力学与工程
办公地点：综合实验I号楼 512
扫描关注
- [281]Zhang Yongcun, Li Xiaobin, Liu Shutian, Zhang, YC (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an a...[J],CHINESE JOURNAL OF AERONAUTICS,2016,29(4):945-951
- [282]Huang, Yu, Zhao, Jian, Liu, Shutian, ST (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..A Gradient-Based Optimization Method for the Design of Layered Phononic Band-Gap Materials[J],ACTA MECHANICA SOLIDA SINICA,2016,29(4):429-443
- [283]董焱章, 刘书田.负折射率材料的实现模式及传输衰减分析[J],湖北汽车工业学院学报,2016,30(2):43-48
- [284]高仁璟, 张莹, 赵剑, 陈文炯, 刘书田, 仝立勇, Chen, Wenjiong(wjchen@dlut.edu.cn).面向结构形状控制的压电纤维复合薄膜驱动器布局方式与控制参数协同优化设计[J],机械工程学报,2016,52(18):177-183
- [285]陈文炯, 刘书田, 张永存, Liu, Shutian(stliu@dlut.edu.cn).基于拓扑优化的自发热体冷却用植入式导热路径设计方法[J],力学学报,2016,48(2):406-412
- [286]Chen, Wenjiong, Liu, Shutian, ST (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Microstructural topology optimization of viscoelastic materials for maximum modal loss factor o...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,53(1):1-14
- [287]Zhao, Jian, Gao, Renjing, Liu, Shutian, Huang, Yu.OPTIMIZATION-BASED DESIGN FOR SPECIFIC BISTABLE MECHANICS OF COMPLIANT MECHANISMS[A],2016
- [288]刘书田.基于铺层参数的纤维布局与铺层方式协同优化[A],2016
- [289]陈文炯, 刘书田.A Two-step Method of Designing Scanning Pattern with Minimized Distortion in Additive Manufacturi...[A],2016
- [290]Chen Wenjiong, Liu Shutian, Tong Liyong, Li Sheng.Design of multi-layered porous fibrous metals for optimal sound absorption in the low frequency...[J],力学快报,2016,6(1):42-48
- [291]赵剑, 高仁璟, 刘书田.Optimization based sensitivity improving method for piezoelectric mass sensor[A],2016
- [292]张永存, 刘书田.On the optimal design of the graded metal honeycomb heat exchanger considering the 3D temperature...[A],2016
- [293]赵剑, 高仁璟, 刘书田.Nonlinear Threshold Mass Detection through Response Amplitude Tracking[A],2016
- [294]赵剑, 高仁璟, 刘书田.Configuration optimization for cantilever-based high order mode resonant mass sensor[A],2016
- [295]刘书田, 陈文炯.Topology optimization based method for design of additive manufacturing structures[A],2016
- [296]王艳霞, 高争鸣, 栾永, 覃开蓉, 刘波, 刘书田, Qin, K.-R., Department of Biomedical Engineering, Dalian University of TechnologyChina, email: krqin@dlut.edu.cn.一种模拟运动后颈总动脉振荡切应力的流动腔装置[J],水动力学研究与进展A辑,2015,30(6):650-656
- [297]Liu, Shutian, Li, Quhao, Chen, Wenjiong, Hu, Rui, Tong, Liyong, ST (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..H-DGTP-a Heaviside-function based directional growth topology parameterization for design optim...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2015,52(5):903-913
- [298]刘立悦, 刘书田.纤维增强复合材料热隐身斗篷设计[A],2015,474-475
- [299]陈文炯, 刘书田.粘弹性阻尼复合材料拓扑最佳阻尼性能优化设计[A],2015,471-472
- [300]苏文政, 刘书田.一类多孔固体的等效偶应力动力学梁模型[J],力学学报,2015,48(1):111-126