|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：工程力学. 计算力学. 航空航天力学与工程
办公地点：综合实验I号楼 512
扫描关注
- [381]唐智亮, 刘书田, 张宗华.薄壁非凸截面多胞管轴向冲击耐撞性研究[J],固体力学学报,2011,S1:206-213
- [382]Lin, Zhe-Qi, Gea, Hae Chang, Liu, Shu-Tian, ST (reprint author), Dalian Univ Technol, Dept Engn Mech, Dalian 116024, Peoples R China..Design of piezoelectric energy harvesting devices subjected to broadband random vibrations by a...[J],ACTA MECHANICA SINICA,2011,27(5):730-737
- [383]Zhang, Zonghua, Liu, Shutian, Tang, Zhiliang, ST (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Comparisons of honeycomb sandwich and foam-filled cylindrical columns under axial crushing load...[J],THIN-WALLED STRUCTURES,2011,49(9):1071-1079
- [384]唐智亮, 刘书田, 张宗华.薄壁圆柱夹层多胞管轴向冲击耐撞性研究[A],2011,1-12
- [385]林哲祺, 刘书田, 郭绍伟.压电生物传感器的质量检测灵敏度分析[A],2011,1-10
- [386]黄毓, 陈文炯, 刘书田.周期性两相层状材料带隙性质分析与优化设计[A],2011,1-7
- [387]刘书田, 侯玉品.基于铺层参数和纤维分布协同优化的层合板最大刚度设计[A],2011,1-8
- [388]徐雅楠, 张永存, 刘书田.非均匀金属蜂窝材料换热性能分析快速数值算法[A],2011,1-13
- [389]陈文炯, 刘书田.多孔材料吸声性能分析与设计优化[A],2011,1-6
- [390]Liu S.T., Hou Y.P..Design of fiber reinforced composite laminates and discussion on feasible region of lamination pa...[A],2011
- [391]马宁, 申国哲, 张宗华, 胡平, 郭威, 刘书田, Hu, P.(pinghu@dlut.edu.cn).热成形金属复合材料的微观结构及力学行为研究[J],材料工程,2011,5:88-92
- [392]Liu, Shutian, Qiao, Heting, HT (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Topology optimization of continuum structures with different tensile and compressive properties...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2011,43(3):369-380
- [393]刘书田, 王博, 阎军, 张永存.超轻质结构与材料的一体优化设计方法与应用[A],2011
- [394]刘书田.位移补偿结构的拓扑优化[A],2011
- [395]张永存, 刘书田.THE OPTIMIZATION MODEL OF THE HEAT CONDUCTION STRUCTURE[A],2011
- [396]张永存, 刘书田.Optimal design of steel frame structure with discrete sections based on gradient method[A],2011
- [397]刘书田.MATERIAL AND STRUCTURAL SIMULTANEOUS OPTIMIZATION BASED ON THE COUPLE-STRESS THEORY[A],2011
- [398]刘书田.铺层方式和纤维分布协同优化的层合板最大刚度设计[A],2011
- [399]刘书田.周期性两相层状带隙材料优化模型[A],2011
- [400]刘书田.Optimal Design of Directional Band-gap Material,[A],2011