|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
学科：机械设计及理论. 机械电子工程
电子邮箱：huojunzhou@dlut.edu.cn
扫描关注
论文成果
当前位置: 复杂机电系统创新设计 >> 科学研究 >> 论文成果- [81]Huo, Junzhou, Yu, Shiqiang, Li, Tao, Yang, Jing.The Theoretical Analysis of Chain Drive System for Heavy Duty Apron Feeder[A],2013,694-697:225-228
- [82]Zhang, Xu, Ling, Jingxiu, Huo, Junzhou, Sun, Wei.Interval Physical Programming and Its Application to Evaluation of Soil State in Shield Tunneli...[A],2013,85-89
- [83]孙伟, 凌静秀, 霍军周.Dynamic Characteristics Study with Multidegree-of-Freedom[J],Mathematical Problems in Engineering,2013,356(15):1250-1260
- [84]Zhang, Xu, Sun, Wei, Huo, Junzhou, Ling, Jingxiu.Cutters Layout Design of the Full-Face Rock Tunnel Boring Machine Based on Physical Programming[A],2013,8103:700-709
- [85]Sun, Wei, Ling, Jingxiu, Huo, Junzhou, Guo, Li, Zhang, Xu, Deng, Liying, JZ (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China..Dynamic Characteristics Study with Multidegree-of-Freedom Coupling in TBM Cutterhead System Bas...[J],MATHEMATICAL PROBLEMS IN ENGINEERING,2013,2013
- [86]Chen, Jing, Huo, Junzhou, Zhang, Ya, Dayong, Weiying, Lin, Yan, JZ (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China..Heuristic Solution Strategy for the Sequential Ballast Water Exchange Problem[J],JOURNAL OF WATERWAY PORT COASTAL AND OCEAN ENGINEERING-ASCE,2013,139(1):72-80
- [87]Huo J., Yu S., Yang J., Li T., Yu, S., School of Mechanical Engineering, Dalian University of Technology, Dalian, 116023, China, email: shiqiang.yu@hotmail.com.Static and dynamic characteristics of the chain drive system of a heavy duty apron feeder[J],Open Mechanical Engineering Journal,2013,7(1):121-128
- [88]霍军周, 郭莉, 孙伟, 张旭, 李震, Li, Z.(lizhen@dlut.edu.cn).多滚刀顺次作用下岩石破碎模拟及刀间距分析[J],哈尔滨工程大学学报,2012,33(1):96-99
- [89]Zhang X., Ding X., Huo J., Sun W., Sun, W., School of Mechanical Engineering, Dalian University of TechnologyChina, email: weisun_dlut@163.com.Interval multi-objective optimization design based on physical programming [Interwa?owa wieloobie...[J],Przeglad Elektrotechniczny,2012,88(7 B):379-381
- [90]霍军周, 孙伟, 郭莉, 李震.多滚刀顺次作用下垂直压入岩石破碎仿真及刀间距优化设计[J],哈尔滨工程大学学报,2012,33(1):1-5
- [91]Zhang, Xu, Sun, Wei, Huo, Junzhou, Ding, Xin, X (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian, Peoples R China..Interval Multi-objective Optimization Design Based on Physical Programming[J],PRZEGLAD ELEKTROTECHNICZNY,2012,88(7B):379-381
- [92]Huo, Junzhou, Sun, Wei, Chen, Jing, Zhang, Xu, JZ (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China..Disc cutters plane layout design of the full-face rock tunnel boring machine (TBM) based on dif...[J],COMPUTERS & INDUSTRIAL ENGINEERING,2011,61(4):1209-1225
- [93]霍军周, 蔡春刚, 李震, 杜长林, 冷磊.直驱式双摆铣头热结构耦合分析研究[J],组合机床与自动化加工技术,2011,5:1-4
- [94]霍军周, 蔡春刚, 杜长林, 陈杰, 冷磊.基于有限元法的数控铣床双摆铣头振动特性分析[J],组合机床与自动化加工技术,2011,4:24-27,30
- [95]Huo Junzhou, Chen Jing, Li Zhen.Optimal Mechanism Design of a Shearing Machine Using An Ant Colony Optimization Algorithm[A],2011,52-54:938-+
- [96]李震, 霍军周, 孙伟, 郭丽, 何恩光.全断面岩石掘进机刀盘结构主参数的优化设计[J],机械设计与研究,2011,27(1):83-86,90
- [97]Sun, Wei, Zhao, Yu, Haifeng, Guo, Li, Zhang, Xu, Li, Zhen, Chen, Jing, Huo, Junzhou, JZ (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China..Disc cutters' layout design of the full-face rock tunnel boring machine (TBM) using a cooperati...[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2011,25(2):415-427
- [98]李震, 霍军周, 孙伟, 杜长林, 冷磊, 高健, 蔡春刚.基于试验验证的数控铣床夹紧套的结构优化[J],机械科学与技术,2011,30(11):1840-1843
- [99]霍军周, 孙伟.A co-evolutionary method with consistency coordination mechanisms and its application to the layo...[A],2011
- [100]霍军周.Cutters Plane Layout Design of the Full-Face Rock Tunnel Boring Machine (TBM) Based on Multi-spir...[A],2011,1288-1291