|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：中国科学院长春光学精密机械与物理研究所
学位：博士
所在单位：机械工程学院
学科：机械制造及其自动化
办公地点：机械学院大方楼5021
联系方式：djwudut@dlut.edu.cn 84707625
电子邮箱：djwudut@dlut.edu.cn
扫描关注
- [21]吴东江, 于学鑫, 赵紫渊, 马广义, Zhou, Cong, Zhang, Bi, Ren, Guanhui, 牛方勇.One-step additive manufacturing of TiCp reinforced Al2O3–ZrO2 eutectic ceramics composites by la...[J],Ceramics International,49(8):12758-12771
- [22]牛方勇, 毕炜明, 李存旭, Sun, Xiong, 马广义, 吴东江.TiC ceramic coating reinforced 304 stainless steel components fabricated by WAAM-LC integrated hy...[J],Surface and Coatings Technology,465
- [23]Cheng, Bo, Mao, Cong, Zhang, Mingjun, 吴东江, Jiang, Hao, 马广义.Comparative study on microstructure and properties of laser welding and argon arc welding Hastell...[J],Optics and Laser Technology,164
- [24]吴东江, 罗贤樟, Jia, Chen, Liu, Dehua, 牛方勇, 马广义.Microstructure evolution and mechanical property of laser welded Al-Li alloy with filler strip[J],Optics and Laser Technology,165
- [25]苗秋玉, 戴智弘, 马广义, 牛方勇, 吴东江.CF/PEEK interleaved laminates with PEEK film interleaving manufactured by laser-assisted forming:...[J],Composites Part A: Applied Science and Manufacturing,172
- [26]牛方勇, 毕炜明, Zhang, Kaijun, Sun, Xiong, 马广义, 吴东江.Additive manufacturing of 304 stainless steel integrated component by hybrid WAAM and LDED[J],Materials Today Communications,2024,35
- [27]邸腾达, 宋晨晨, 胡岩, Zhao, Yuhui, 马广义, Wang, Zhiguo, 牛方勇, 吴东江.Mechanism of grain refinement and mechanical property enhancement of Ti-45Al-8Nb alloy by directe...[J],Journal of Alloys and Compounds,939
- [28]苗秋玉, 戴智弘, 马广义, 牛方勇, 吴东江.Analysis of spring-back deformation of CF/PEEK thin angled laminates by laser-assisted forming[J],Composite Structures,321
- [29]Han, Jian, Sun, Shiyong, 牛斌, Yang, Rui, 吴东江.树 脂 基 复 合 材 料 点 阵 结 构 的 制 造 技 术 研 究 进 展[J],Acta Aeronautica et Astronautica Sinica,44(9)
- [30]牛方勇, Zhang, Kaijun, Han, Jun, Xu, Mingze, Wang, Jianhe, Jiang, Nizhou, 马广义, 吴东江, 王宏.Fabrication of TC4/TiCp New Hip Prosthesis by Laser Cladding[J],Advanced Engineering Materials,2024
- [31]吴东江, Liu, Dehua, Zhang, Ziao, Yilun, 牛方勇, 马广义.电弧增材制造 2024 铝合金的微观组织与力学性能[J],Acta Metallurgica Sinica,2024,59(6):767-776
- [32]Wang, Zhao, Bian, Hairong, Lu, Haifei, 马广义, 吴东江, Luo, Kaiyu, Jinzhong.Significant improvement in the strength-toughness and isotropy of laser powder bed fused Ti6Al4V ...[J],Materials Science and Engineering: A,880
- [33]Liu, Dehua, 王云嵩, 葛长榕, 吴东江, Chen, Zhuo, Zhao, Qingyu, 牛方勇, 马广义.Enhanced high-temperature mechanical properties of laser-arc hybrid additive manufacturing of Al-...[J],JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,169:220-234
- [34]牛方勇, 邢浩鹏, 阚方言, 马广义, Sun, Xiong, 吴东江.Remanufacturing of 3D-Damaged Components Based on LDED Technology[J],Journal of Materials Engineering and Performance,2024
- [35]牛方勇, 王启勇, 单博洋, Sun, Xiong, 马广义, 吴东江.Synchronous-hammer-forging-assisted wire arc additive manufacturing Al-Mg alloy[J],Journal of Alloys and Compounds,965
- [36]师敬桉, Liu, Liu, Dehua, 马广义, Chen, Zhuo, 牛方勇, Yu, Shiyong, 吴东江.Laser-Direct Current arc Hybrid Additive Manufacturing of Cu-Cr-Zr Alloy: Microstructure Evaluati...[J],COATINGS,2024,13(7)
- [37]刘骁, 宋晨晨, 邸腾达, 马广义, 牛方勇, 吴东江.随动同步电感辅助直接激光沉积温度分布规律研究[J],应用激光,2024,43(4):28-38
- [38]苗秋玉, 戴智弘, 马广义, 牛方勇, 吴东江.Analysis of spring-back deformation of CF/PEEK thin angled laminates by laser-assisted forming[J],Composite Structures,321
- [39]Han, Jian, Sun, Shiyong, 牛斌, Yang, Rui, 吴东江.树 脂 基 复 合 材 料 点 阵 结 构 的 制 造 技 术 研 究 进 展[J],Acta Aeronautica et Astronautica Sinica,44(9)
- [40]牛方勇, Zhang, Kaijun, Han, Jun, Xu, Mingze, Wang, Jianhe, Jiang, Nizhou, 马广义, 吴东江, 王宏.Fabrication of TC4/TiCp New Hip Prosthesis by Laser Cladding[J],Advanced Engineering Materials,2024