|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：中国科学院长春光学精密机械与物理研究所
学位：博士
所在单位：机械工程学院
学科：机械制造及其自动化
办公地点：机械学院大方楼5021
联系方式：djwudut@dlut.edu.cn 84707625
电子邮箱：djwudut@dlut.edu.cn
扫描关注
- [1]牛方勇, 毕炜明, 刘忠海, Sun, Xiong, 马广义, 吴东江.304-Ni60B (NiCrBSi) composite components using WAAM-LC integrated hybrid manufacturing[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2025,132(1-2):463-474
- [2]夏勇, 牛方勇, 吴东江.Enhanced mechanical properties and corrosion resistance of remanufactured Ti-6Al-4V alloys by com...[J],INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING,2025,19(3)
- [3]雷明凯, 郭东明, 朱小鹏, 朱宝, 李昱鹏, Lin, L., Zhang, L.W., Wang, W.G., Li, M.Q., 吴东江.High-Performance Manufacturing of Canned Main Coolant Pump - Part I: Synergistical Design and Pro...[J],Journal of Nuclear Engineering and Radiation Science,2025,11(4)
- [4]邸腾达, 陈卓, 谷崇煜, Liang, Xiaokang, 牛方勇, 马广义, 吴东江.Mechanical property enhancement mechanism of Cu-Cr-Zr alloy/316 L stainless steel composites by d...[J],Journal of Alloys and Compounds,2025,1042
- [5]牛方勇, 毕炜明, 刘忠海, Sun, Xiong, 马广义, 吴东江.304-Ni60B (NiCrBSi) composite components using WAAM-LC integrated hybrid manufacturing[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2025,132(1-2):463-474
- [6]夏勇, 牛方勇, 吴东江.Enhanced mechanical properties and corrosion resistance of remanufactured Ti-6Al-4V alloys by com...[J],INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING,2025,19(3)
- [7]雷明凯, 郭东明, 朱小鹏, 朱宝, 李昱鹏, Lin, L., Zhang, L.W., Wang, W.G., Li, M.Q., 吴东江.High-Performance Manufacturing of Canned Main Coolant Pump - Part I: Synergistical Design and Pro...[J],Journal of Nuclear Engineering and Radiation Science,2025,11(4)
- [8]邸腾达, 陈卓, 谷崇煜, Liang, Xiaokang, 牛方勇, 马广义, 吴东江.Mechanical property enhancement mechanism of Cu-Cr-Zr alloy/316 L stainless steel composites by d...[J],Journal of Alloys and Compounds,2025,1042
- [9]Zhao, Dake, Bi, Guijun, Huang, Yunfei, Zhu, Jia, Chao, Lichao, 牛方勇, 吴东江.Thermal properties for Al2O3-based melt-grown ceramics prepared by laser-directed energy depositi...[J],JOURNAL OF ALLOYS AND COMPOUNDS,2025,1010
- [10]Dai, Zhihong, 苗秋玉, 马广义, 牛方勇, 吴东江.Multi-scale finite element analysis of laser-assisted forming of CF/PEEK composite corner structu...[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2024
- [11]马广义, 王宏宇, 马世勇, 邸腾达, 牛方勇, 吴东江.基于DPM-VOF方法的AlCoCrFeNi高熵合金同轴送粉激光定向能量沉积过程数值模拟[J],中国激光,2024
- [12]吴东江, 吕伟杰, 于学鑫, 牛方勇, Li, Zheng, Zhou, Cong, Zhang, Bi, Wang, Wei, 张环月, 马广义.Investigation on melt growth (Mg, Co, Ni, Cu, Zn)O oxide ceramics prepared by laser directed ener...[J],Ceramics International,2024
- [13]吴东江, 吕伟杰, 于学鑫, 牛方勇, Li, Zheng, Zhou, Cong, Zhang, Bi, Wang, Wei, 张环月, 马广义.Investigation on melt growth (Mg, Co, Ni, Cu, Zn)O oxide ceramics prepared by laser directed ener...[J],Ceramics International,2024
- [14]王儒政, 马广义, 吴胜男, 刘德华, 牛方勇, 吴东江.激光-电弧复合增材制造Al-Cu合金T型结构微观组织演变与熔池流动行为分析[J],航空制造技术,2024,67(9):62
- [15]戴智弘, 苗秋玉, 吴东江.Data simulation of the impact of ball strikes on the bottom of electric vehicle battery packs bas...[J],2024,53
- [16]于学鑫, 冯啸, 吴东江, Zhou, Cong, Zhang, Bi, 张环月, 白倩, 马广义, 牛方勇.One-step additive manufacturing of melt-growth porous ceramics by laser directed energy depositio...[J],JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,2024,44(15)
- [17]李云飞, 徐铭泽, 牛方勇, 吴东江, Hao, Yunbo, Zhao, Kai, Yu, Chengshui, Zheng, Jianchao, 白倩, 马广义.Influence of synchronous-hammer-forging intervention temperature on the microstructure and proper...[J],MATERIALS LETTERS,2024,372
- [18]马广义, 宋晨晨, 隋江浩, Zhang, Ziao, 牛方勇, 吴东江.Interface formation mechanism and mechanical properties analysis of W/ Ti6Al4V composites prepare...[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2024,909
- [19]宋晨晨, 邸腾达, 吴东江, Xu, Gang, Zhang, Ziao, Wang, Daye, 牛方勇, 马广义, Liu, Liu.Intermetallic phases transition mechanism of the interface of Ti6Al4V-Inconel718 graded material ...[J],MATERIALS CHARACTERIZATION,2024,215
- [20]牛方勇, 李璐, 徐铭泽, 吴东江, Li, Cunxu, Hao, Yunbo, Zhao, Kai, 张环月, Liu, Guoping, 马广义.Microstructure and mechanical properties of hammer-forging assisted wire-arc directed energy depo...[J],Virtual and Physical Prototyping,2024,19(1)