点击次数：

论文类型：期刊论文

发表时间：2013-08-15

发表刊物：APPLIED SURFACE SCIENCE

收录刊物：SCIE、EI、Scopus

卷号：279

页面范围：137-141

ISSN号：0169-4332

关键字：High current pulsed electron beam; Surface irradiation; Hard alloy; Nano-grained microstructure; Microhardness; Wear

摘要：The surface microstructure of WC-6% Co hard alloy irradiated by high current pulsed electron beam (HCPEB) at a moderate energy density of 3 J/cm(2) and pulse number of 1-35 was investigated by using scanning electron microscopy, X-ray diffractometry and transmission electron microscopy. It is found that the WC particles got remelted with the increasing number of HCPEB pulses, and a flat and compact surface with micro-crack network of cell size similar to several decades of mu m was generated. At the same time, the rapid thermo cycles during HCPEB irradiations led to the formation of surface nano-grained microstructure on WC-6% Co hard alloy with a thickness of 0.8-1 mu m. When using 20 HCPEB pulses, an optimum surface microstructure composed of a mixture of nano-grained (20-100 nm) WC1-x and Co3W9C4 phases was obtained which gave rise to a significant improvement in surface microhardness of 21.8 GPa and wear resistance by 4 times. The performance of irradiated surface would be deteriorated by overused HCPEB irradiations due to the excessive dissolution of WC hard particles and the large amplitude of residual tensile stress accompanied by severe surface cracking and local cavity defects. (C) 2013 Elsevier B.V. All rights reserved.