点击次数：

论文类型：期刊论文

发表时间：2013-09-23

发表刊物：Advanced Materials Research

收录刊物：EI、CPCI-S、SCIE、Scopus

卷号：797

页面范围：140-145

ISSN号：9783037858257

关键字：High-accuracy calibration; Tilt angle; Grinding; Seal ring; Reactor coolant pump

摘要：The hydrostatic seal rings are one of the most important components used in reactor coolant pumps. They are generally made of hard materials such as silicon nitride, alumina, silicon carbide and tungsten carbide. Meanwhile, the form error should be within the length of one to two helium light bands and the surface roughness should be in the scale of nanometers, which make them difficult to machining. In order to solve this problem, a high accuracy grinding method using a large cup wheel had been proposed and the tilt angle of the cup wheel spindle become a crucial factor affecting the ground form errors. This paper addresses a novel method for high-accuracy calibrating the tilt angle of the cup wheel spindle to fit the extremely shallow taper angle of the seal ring conical surface, and the mathematical model is established incorporating a standard optical flat with a high-accuracy laser displacement sensor. The practicability of this method is verified by grinding a seal ring sample with the outer diameter is 200 mm and the taper angle is 700 mu rad. It is found that the taper angle error is only 1.72 mu rad and the radical profile error of the conical surface is about 0.22 mu m.