郭东明

个人信息Personal Information

教授

博士生导师

硕士生导师

性别：男

毕业院校：大连理工大学

学位：博士

所在单位：机械工程学院

电子邮箱：guodm@dlut.edu.cn

扫描关注

个人学术主页

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[1]Zhang, Zhenyu, Lin, Cheng-Te, Li, Suzhi, Parkin, Ivan P., Guo, Dongming, Du, Yuefeng, Huang, Siling, Meng, Fanning, Chen, Leilei, Xie, Wenxiang, Chang, Keke, Chenhui, Lu, Yao, ZY (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China., Li, SZ (reprint author), Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Xian 710049.Macroscale Superlubricity Enabled by Graphene-Coated Surfaces[J],ADVANCED SCIENCE,2020,7(4):1903239
[2]Zhang, Zhenyu, Wang, Xinze, Xie, Wenxiang, Guo, Dongming, Liao, Longxing, ZY (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a n...[J],APPLIED SURFACE SCIENCE,2020,506
[3]Guo, Xiaoguang, Yuan, Song, Huang, Junxin, Chen, Chong, Kang, Renke, Jin, Zhuji, Dongming, S (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Effects of pressure and slurry on removal mechanism during the chemical mechanical polishing of...[J],APPLIED SURFACE SCIENCE,2020,505
[4]Zhang, Yuan, Kang, Renke, Dong, Zhigang, Wang, Qing, Zhu, Xianglong, Xu, Rui, Guo, Dongming, ZG (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Microstructural evolution of soft magnetic 49Fe-49Co-2V alloy induced by drilling[J],MATERIALS & DESIGN,2020,189
[5]Yuan, Song, Jin, Zhuji, Kang, Renke, Guo, Dongming, Xiaoguang, Huang, Junxin, Lu, Menggang, XG (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Sub-nanoscale polishing of single crystal diamond(100) and the chemical behavior of nanoparticl...[J],DIAMOND AND RELATED MATERIALS,2019,100
[6]Guo, Xiaoguang, Huang, Junxin, Yuan, Song, Chen, Chong, Jin, Zhuji, Kang, Renke, Dongming, S (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Effect of surface hydroxylation on ultra-precision machining of quartz glass[J],APPLIED SURFACE SCIENCE,2020,501
[7]Zhang, Shuohua, Jin, Zhuji, Kang, Renke, Guo, Dongming, Xiaoguang, XG (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Material removal characteristics of precorroded Lu2O3 laser crystals and elastic deformation mo...[J],TRIBOLOGY INTERNATIONAL,2020,143
[8]徐振哲, 金洙吉, 姜冠楠, 施远, 郭东明.控制浅小孔电解加工深度的研究[J],现代制造工程,2019,8:68-73
[9]Guo, Xiaoguang, Zhai, Ruifeng, Kang, Renke, Jin, Zhuji, Dongming, RF (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Study of the influence of tool rake angle in ductile machining of optical quartz glass[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,104(1-4):803-813
[10]Liu, Ning, Sheng, Xianjun, Zhang, Chunbo, Guo, Dongming, XJ (reprint author), Dalian Univ Technol, Sch Elect Engn, Dalian 116024, Peoples R China..Design of Dual-Band Composite Radome Wall With High Angular Stability Using Frequency Selective...[J],IEEE ACCESS,2019,7:123393-123401
[11]郭民政, 周平, 闫英, 郭东明.大面积液浮平面电极稳定性分析[J],现代机械,2019,4:16-20
[12]Cui, Junfeng, Tang, Chun, Jiang, Nan, Parkin, Ivan P., Guo, Dongming, Zhang, Zhenyu, Liu, Dongdong, Danli, Hu, Wei, Zou, Li, Lu, Yao, Chi, Huanhuan.Unprecedented Piezoresistance Coefficient in Strained Silicon Carbide[J],NANO LETTERS,2019,19(9):6569-6576
[13]Wang, Lin, Zhou, Ping, Yan, Ying, Kang, Renke, Guo, Dongming, P (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Physically-based modeling of pad-asperity scale chemical-mechanical synergy in chemical mechani...[J],TRIBOLOGY INTERNATIONAL,2019,138:307-315
[14]Yan, Ying, Huang, Ning, Guo, Dongming, Wang, Yonghao, Zhou, Ping, P (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,56:506-512
[15]Liu, Ziyuan, Gao, Hang, Guo, Dongming, H (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Polishing technique for KDP crystal based on two-phase air-water fluid[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,56:404-411
[16]Wu, Dongjiang, Liu, Hanchao, Lu, Fan, Ma, Guangyi, Yan, Shuai, Niu, Fangyong, Guo, Dongming, GY (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Liaoning, Peoples R China..Al2O3-YAG eutectic ceramic prepared by laser additive manufacturing with water-cooled substrate[J],CERAMICS INTERNATIONAL,2019,45(3):4119-4122
[17]Zhang, Zhenyu, Cui, Junfeng, Jiabo, Liu, Dongdong, Yu, Zhijian, Guo, Dongming, ZY (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China..Environment friendly chemical mechanical polishing of copper[J],APPLIED SURFACE SCIENCE,2019,467:5-11
[18]Wang, Ke, Yan, Ying, Zhou, Ping, Shi, Kang, Guo, Dongming, P (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Effect of cupric ion concentration on the etching behavior of copper in Electrogenerated Chemic...[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,55:70-76
[19]刘宁, 盛贤君, 高祥, 张春波, 郭东明.Design of Dual-Band Miniaturized Frequency Selective Surface Using Branched Tortuous Structure[J],ACES JOURNAL,2019,33(1):49-55
[20]Ou, Li -Wei, Wang, Ya-Hui, Hu, Hui-Qing, Zhang, Liang-Liang, Dong, Zhi-Gang, Kang, Ren-Ke, Guo, Dong-Ming, Shi, Kang.Photochemically combined mechanical polishing of N-type gallium nitride wafer in high efficienc...[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,55:14-21

共751条 1/38

首页上页下页尾页页