An accurate determination method for constitutive model of anisotropic tubular materials with DIC-based controlled biaxial tensile test
Date：2020-08-13 Hits:
Indexed by:Journal Papers
Journal:INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
Included Journals:SCIE
Volume:181
ISSN No.:0020-7403
Key Words:Anisotropic tubular material; Constitutive model; Biaxial tensile test; Digital image correlation; Hydro-bulging; FEA
Abstract:The reliability of numerical simulation results vitally depends on the accurate determination of the constitutive model, which requires accurate and sufficient experimental data. To address the current limitations of the range and accuracy of the experimental data of tubular materials, a novel controlled biaxial tensile testing device was developed using digital image correlation (DIC) system as the deformation measuring tool. Using such a device, arbitrary biaxial tensile stress path can be accurately applied to tubular specimens, and the strain can be accurately and continuously measured over the whole deformation process. Firstly, the accurate experimental data of AA6061-O tubes were obtained through the controlled biaxial tensile tests. Then, using the experimental data, the constitutive model considering the evolution of anisotropic characteristics was calibrated based on the Yld2000-2d yield criterion. Finally, the accuracy of the calibrated constitutive model was verified in engineering practices by compiling the constitutive model into finite element software as a user material subroutine (VUMAT) for simulating tube hydro-bulging. Excellent agreements were achieved between experimentally-determined and predicted bulge height, bulge profile, and pole thickness of bulged tubes over the whole hydro-bulging process. It is demonstrated that the DIC-based controlled biaxial tensile test is effective to accurately calibrate the constitutive model of tubular materials, which can be used for both the research of plastic deformation behavior and practical application of hydroforming industry.
Date of Publication:2020-09-01