![]() |
个人信息Personal Information
教授
博士生导师
硕士生导师
性别:男
毕业院校:哈尔滨工业大学
学位:博士
所在单位:材料科学与工程学院
电子邮箱:liulm@dlut.edu.cn
扫描关注
- [161]Hao, Xinfeng, Liu, Liming, XF (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Effect of Laser Pulse on Arc Plasma and Magnesium Target in Low-Power Laser/Arc Hybrid Welding[J],IEEE TRANSACTIONS ON PLASMA SCIENCE,2009,37(11):2197-2201
- [162]Liu, Liming, Qi, Xiaodong, LM (reprint author), Dalian Univ Technol, Sch Mat Sci, Dalian 116024, Peoples R China..Effects of copper addition on microstructure and strength of the hybrid laser-TIG welded joints...[J],JOURNAL OF MATERIALS SCIENCE,2009,44(21):5725-5731
- [163]Liu, Liming, Hao, Xinfeng, LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Improvement of laser keyhole formation with the assistance of arc plasma in the hybrid welding ...[J],OPTICS AND LASERS IN ENGINEERING,2009,47(11):1177-1182
- [164]Liu, L. M., Shan, Ch., C (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Liaoning, Peoples R China..Study on laser-tungsten inert gas hybrid welding of dissimilar Mg alloy and steel with Ni as in...[J],MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK,2009,40(10):780-783
- [165]吴中辉, 宋刚, 刘黎明.镁铝钎焊的微观组织及断口分析[A],2009,83-87
- [166]Wu Z.-H., Song G., Liu L.-M., Wu, Z.-H., School of Materials Science, Engineering, Dalian University of Technology, Dalian 116024, China.Analyses on joint microstructure and fracture morphology of soldering Mg/Al[J],Cailiao Kexue yu Gongyi/Material Science and Technology,2009,17(SUPPL. 1):83-87
- [167]刘黎明.镁合金焊接研究进展[A],2009,18-23
- [168]任大鑫, 刘黎明, Ren, D..镁合金激光胶接焊胶层作用分析[J],机械工程学报,2009,45(8):266-269,275
- [169]刘黎明.镁合金与异质材料焊接接头界面行为及研究焊接性[J],焊接,2009,7:42-48
- [170]Liu, Liming, Jiang, Jianbo, LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Formation and Disappearance of Pores in Plasma Arc Weld Bonding Process of Magnesium Alloy[J],176th Annual Conference of the Japan-Society-for-the-Promotion-of-Science,2009,50(7,SI):1649-1654
- [171]Liu, L. M., Wang, H. Y., LM (reprint author), Dalian Univ Technol, Dept Mat Sci & Engn, Dalian, Peoples R China..The effect of the adhesive on the microcracks in the laser welded bonding Mg to Al joint[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2009,507(1-2):22-28
- [172]Liu, Liming, Jiang, Jianbo, LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, State Key Lab Mat Surface Modificat, Dalian 116024, Peoples R China..The effect of adhesive layer on variable polarity plasma arc weld bonding process of magnesium ...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2009,209(6):2864-2870
- [173]刘黎明, 黄瑞生, 曹运明, Liu, L.(liulm@dlut.edu.cn).低功率YAG激光-熔化极气体弧焊复合焊接电弧等离子体行为研究[J],中国激光,2009,36(12):3167-3173
- [174]刘黎明.镁合金与异质材料焊接接头界面行为及焊接性研究[J],焊接,2009,7:42-48
- [175]刘黎明.镁合金焊接技术研究[A],2008,101-110
- [176]Liu, Liming, Hao, Xinfeng, LM (reprint author), Dalian Univ Technol, State Key Lab Mat Modificat, Dalian 116024, Peoples R China..Study of the effect of low-power pulse laser on arc plasma and magnesium alloy target in hybrid...[J],JOURNAL OF PHYSICS D-APPLIED PHYSICS,2008,41(20)
- [177]杨峥山, 宋刚, 刘黎明, 祝美丽.6061铝合金表面电弧喷涂纯铝涂层的研究[J],轻合金加工技术,2008,36(9):31-35
- [178]Liu, L. M., Zhao, X., LM (reprint author), Dalian Univ Technol, State Key Lab Mat Modificat, Dalian 116024, Peoples R China..Study on the weld joint of Mg alloy and steel by laser-GTA hybrid welding[J],MATERIALS CHARACTERIZATION,2008,59(9):1279-1284
- [179]Liu, L. M., Jiang, J. B., LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, State Key Lab Mat Surface Modificat, Dalian 116024, Peoples R China..Keyhole mode variable polarity plasma arc weld bonding of Mg alloy[J],MATERIALS RESEARCH INNOVATIONS,2008,12(3):147-150
- [180]Liu, L. M., Hao, X. F., Du, X., LM (reprint author), Dalian Univ Technol, State Key Lab Mat Modificat, Dalian 116024, Peoples R China..Microstructure characteristics and mechanical properties of laser - TIG hybrid welding joint of...[J],MATERIALS RESEARCH INNOVATIONS,2008,12(3):114-118