|
个人信息Personal Information
副教授
硕士生导师
性别：男
毕业院校：东京大学
学位：博士
所在单位：机械工程学院
学科：车辆工程
办公地点：大连理工大学综合二号实验楼
电子邮箱：liuxs@dlut.edu.cn
扫描关注
- [21]Yang, Yuxing, 刘学术, 王一奇, 高航, 鲍永杰, Li, Rupeng.An enhanced spring-mass model for stiffness prediction in single-lap composite joints with cons...[J],COMPOSITE STRUCTURES,2022,187:18-26
- [22]刘学术.基于兴趣驱动的三维造型技术教学改革[J],实验室科学,2014,17(3):107-109
- [23]杨宇星, 王一奇, 刘学术, 高航.考虑损伤演化阶段的复合材料渐进损伤模型[A],第三届中国国际复合材料科技大会,2017,1
- [24]葛恩德, 尚艳伟, 刘学术, 李汝鹏.装配工艺参数对复合材料构件弯曲性能的影响[J],复合材料科学与工程,2021,07:84-92
- [25]谢建超, 周洪, 刘学术, 宋世伟.装配间隙数字化测量方法[J],航空精密制造技术,2019,55(5):28-32
- [26]鲍永杰, 王一奇, 高航, 刘学术, 张旖旎.单向碳纤维/环氧树脂复合材料钻削过程温度场研究（英文）[J],Journal of Central South University,2019,26(10):2717-2728
- [27]高航, 王建, 杨宇星, 刘学术, 陈磊, 李汝鹏.垂直度误差对复合材料单钉连接性能的影响[J],航空学报,2017,2:280-288
- [28]刘学术, 杨宇星, 鲍永杰, 高航, 李汝鹏.垂直度误差影响复合材料层合板层间应力分析[J],机械科学与技术,2018,37(1):138-147
- [29]张晓丰, 封万程, 刘学术, 王昊阳.汽车液压制动管路密封性参数化研究[J],汽车工艺与材料,2022,3:39-44
- [30]李汝鹏, 陈磊, 刘学术, 曾祥钱, 高航.基于渐进损伤理论的复合材料开孔拉伸失效分析[J],航空材料学报,2022,38(5):138-146
- [31]高航, 曾祥钱, 刘学术, 王一奇, 杨宇星, 丛茜.大型复合材料构件连接装配二次损伤及抑制策略[J],航空制造技术,2022,22:28-35
- [32]刘学术, Yang, Yuxing, 高航, 鲍永杰, Li, Rupeng, 陈雷.Effects of hole-perpendicularity error on joint stiffness of single-lap double-bolt composite joi...[J],Engineering Transactions,2017,65(2):289-305
- [33]刘学术, Chang, Junhao, Yang, Yuxing, 王一奇, 鲍永杰, 高航.Evaluation of Assembly Gap from 3D Laser Measurements via FEA Simulation[J],International Journal of Aerospace Engineering,2018,2018
- [34]Bao Yong-jie, Zhang Yi-ni, Wang Yi-qi, Gao Hang, Liu Xue-shu, Wang, YQ, Gao, H (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab, Minist Educ Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Investigation on temperature field of unidirectional carbon fiber/epoxy composites during drill...[J],JOURNAL OF CENTRAL SOUTH UNIVERSITY,2019,26(10):2717-2728
- [35]Liu, Xueshu, Li, Jinlei, Lei, Jianhua, Wang, Qi, Gao, Qian.Study on Cure Deformation of Metal/CFRP Laminated Composites[A],2019,616(1)
- [36]Chang, Junhao, Yang, Yuxing, Liu, Xueshu, Gao, Hang, Wang, Yiqi.A mixed shimming method in eliminating the gaps during the assembly process of the complex stru...[A],2019,493(1)
- [37]Zeng, Xiangqian, Wang, Yi-Qi, Liu, Xueshu, Bao, Yongjie, Gao, Hang.A numerical model on compressive behavior of CFRP laminate with a designed delamination[A],2017,2017-August
- [38]Yang, Yuxing, Wang, Yi-Qi, Liu, Xueshu, Bao, Yongjie, Gao, Hang.A stiffness model for unidirectional composite bolted joints[A],2017,2017-August
- [39]Yang, Yuxing, Wang, Yi-Qi, Liu, Xueshu, Gao, Hang, Bao, Yongjie, XS (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Peoples R China..The effect of shimming material on flexural behavior for composite joints with assembly gap[J],COMPOSITE STRUCTURES,2019,209:375-382
- [40]李汝鹏, 陈磊, 刘学术, 曾祥钱, 高航.基于渐进损伤理论的复合材料开孔拉伸失效分析[J],航空材料学报,2018,38(5):138-146