李廷举

个人信息Personal Information

教授

博士生导师

硕士生导师

任职 : 辽宁省高校重点实验室主任

性别:男

毕业院校:日本国名古屋大学

学位:博士

所在单位:材料科学与工程学院

学科:材料加工工程

联系方式:0411-84708940

电子邮箱:tjuli@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Synthesis and Its Characteristic of Silicon Nitride Film Deposited by ECR-PECVD at Low Temperature

点击次数:

论文类型:会议论文

发表时间:2010-08-02

收录刊物:EI、CPCI-S、Scopus

卷号:654-656

页面范围:1712-+

关键字:Silicon nitride; antireflection coating; refractive index; ECR-PECVD

摘要:The silicon nitride films have been deposited by Electron Cyclotron Resonance-plasma enhanced chemical vapor deposition (ECR-PECVD) method at low temperature, and the pure nitrogen is introduced into the ECR chamber as the plasma gas, the silane(Ar diluted, Ar:SiH4=19:1) is used as precursor gas. The optimum deposition parameters of SiN films for photovoltaic application as an efficient antireflection coating(ARC) have been investigated. The actual composition of the films will be varied with the deposition conditions, such as gas flow rate ratio(N-2/SiH4), substrate temperature, and microwave power. The effect of deposition parameters on the optical performance of SiN films was determined by Ellipsometry. The Si-N and N-H stretching characteristic peaks of SiN films have been observed by FTIR spectroscopy. Results shown that uniform silicon nitride films with low hydrogen content can be deposited at high deposition rate(10.7nm/min), and the refractive index increased with the increasing of substrate temperature and microwave power. The film shows good optical properties (refractive index is 2.0 or so) and satisfied surface quality (average roughness is 1.45nm) when the deposition parameter is 350 degrees C and microwave power is 650W.