location: Current position: Home >> Scientific Research >> Paper Publications

Thermal characteristics and kinetics of refining and chemicals wastewater, lignite and their blends during combustion

Hits:

Indexed by:Journal Papers

Date of Publication:2015-08-01

Journal:ENERGY CONVERSION AND MANAGEMENT

Included Journals:SCIE、EI、Scopus

Volume:100

Page Number:201-211

ISSN No.:0196-8904

Key Words:Wastewater; Lignite; Co-combustion; Thermogravimetric analysis; Kinetics

Abstract:Co-combustion characteristics of refining and chemicals wastewater solid (RS) and Huolinhe lignite (HL) were studied through thermogravimetric analysis (TGA). The combustion behaviors of the blends at various RS to HL ratios were compared with those of the individual samples. Co-combustion experiments showed that the combustion performance of the blends would be improved with the percentage of RS rising. The interactions between RS and HL during the co-combustion could be divided into four phases, and there were no interactions below 120 degrees C (PH 1) and beyond 700 degrees C (PH 4), inhibitive effects at the temperature range of 120-700 degrees C (PH 2 and PH 3). The results of SEM and XRD indicated that the sintering and fusion degree of residues after combustion became more severe with the percentage of RS increasing. The iso-conversional methods, Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWD), were used for the kinetic analysis of the combustion process. The results showed that the activation energy of RS was higher than that of HL, and the minimum value was obtained at 75HL/25RS. Crown Copyright (C) 2015 Published by Elsevier Ltd. All rights reserved.

Pre One:基于动网格技术模拟飞灰粒径对沉积特性的影响

Next One:Further Study on Ash Deposits in a Large-Scale Wastewater Incineration Plant: Ash Fusion Characteristics and Kinetics