|
个人信息Personal Information
教授
硕士生导师
任职 : 大连理工大学工程力学系副主任；大连理工大学郑州研究院院长
性别：男
毕业院校：香港科技大学
学位：博士
所在单位：力学与航空航天学院
办公地点：大连理工大学工程力学系511
联系方式：18604099383
电子邮箱：ruansl@dlut.edu.cn
扫描关注
- [21]宋贝贝, 龚文正, 李宗蔚, 阮诗伦, 申长雨.静电纺无纺纤维膜与单根纤力学关系的研究[J],化工新型材料,2017,45(12):149-151
- [22]李宗蔚, 王新宇, 任梦柯, 宋贝贝, 阮诗伦, 李征.基于Fluent的三维注塑充填界面追踪方法研究[J],塑料工业,2016,44(12):28-32,45
- [23]宋贝贝, 龚文正, 李宗蔚, 阮诗伦, 杨春秋, 申长雨.工艺参数对静电纺PPESK微纳米纤维膜性能的影响[J],工程塑料应用,2016,44(11):44-47
- [24]Li, Zheng, Ruan, Shilun, Gu, Junfeng, Wang, Xinyu, Shen, Changyu, Z (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Liaoning, Peoples R China..Investigation on parallel algorithms in efficient global optimization based on multiple points ...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):747-773
- [25]Wang, Xinyu, Li, Zheng, Gu, Junfeng, Ruan, Shilun, Shen, Changyu, Xicheng, JF (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Reducing service stress of the injection-molded polycarbonate window by optimizing mold constru...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(5-8):1691-1704
- [26]王新宇, 李征, 谷俊峰, 阮诗伦, 申长雨, 王希诚, Gu, Junfeng(jfgu@dlut.edu.cn).工程用高聚物注塑成型制品服役应力优化设计[J],化工学报,2016,67(7):3040-3046
- [27]陈世文, 杨志勋, 阮诗伦, 周茂夫, 岳前进.基于数值模拟的棱形液舱晃荡砰击载荷尺寸敏感性分析研究[J],海洋工程装备与技术,2016,3(1):39-45
- [28]王新宇, 阮诗伦, 常保宁, 林卜阳, 方海东.聚醚醚酮材料改性、加工与应用[J],精密成形工程,2016,1:27-31,42
- [29]阮诗伦, 杨春秋, 申长雨.工艺参数对静电纺PPESK 微纳米纤维膜性能的影响[J],工程塑料应用,2016,67(67):44-47
- [30]王新宇, 申长雨, 阮诗伦, 谷俊峰, 李征.Reducing service stress of the injection molded polycarbonate window by optimizing mold construct...[J],The International Journal of Advanced Manufacturing Technology,2016,86(5):1691-1704
- [31]赵小西, 卫志军, 阮诗伦, 岳前进, 陈晓东.液体晃荡荷载与液舱运动相位关系的数值研究[J],船舶力学,2015,19(8):919-926
- [32]Zhao, Jian, Cheng, Gengdong, Ruan, Shilun, Li, Zheng, J (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Multi-objective optimization design of injection molding process parameters based on the improv...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,78(9-12):1813-1826
- [33]李征, 王希诚, 阮诗伦, 谷俊峰.Integration optimization of molding and service for injection-molded product[J],The International Journal of Advanced Manufacturing Technology,2015,0(0):0-0
- [34]李征, 王希诚, 谷俊峰, 阮诗伦.Reducing service stress of the injection-molded polycarbonate window by optimizing mould construc...[J],The International Journal of Advanced Manufacturing Technology,2015,0(0):1-10
- [35]李征, 谷俊峰, 阮诗伦.面向服役的高聚物注塑成型应力优化设计[A],2015
- [36]朱小龙, 阮诗伦, 陈世文.三维薄膜型FLNG储舱晃荡载荷的数值仿真[J],计算机辅助工程,2014,23(5):44-48
- [37]Wei Z., Ruan S., Chen X., Luo S., Yue Q..An experimental investigation of liquid sloshing impact load in a large-scaled prismatic tank[A],2014,272-277
- [38]阮诗伦, 孙本强, 刘婵.碳纳米管/聚乙烯界面分子构型的数值仿真[J],计算机辅助工程,2014,23(2):110-114,116
- [39]卫志军, 阮诗伦, 岳前进, 谢彬.超大型储液舱内晃荡载荷实验研究[J],海洋工程装备与技术,2014,1(1):55-61
- [40]刘婷婷, 阮诗伦, 尹江洲, 岳前进, 谢彬.浮式液化天然气液货围护系统的失效模式分析[J],海洋工程装备与技术,2014,1(1):50-54