孙依人

个人信息Personal Information

副教授

硕士生导师

性别:男

毕业院校:大连理工大学

学位:博士

所在单位:交通运输系

学科:道路与铁道工程. 市政工程

办公地点:综合实验4号楼520室

电子邮箱:sunyiren@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Investigating impacts of warm-mix asphalt technologies and high reclaimed asphalt pavement binder content on rutting and fatigue performance of asphalt binder through MSCR and LAS tests

点击次数:

论文类型:期刊论文

发表时间:2019-05-10

发表刊物:JOURNAL OF CLEANER PRODUCTION

收录刊物:SCIE、EI

卷号:219

页面范围:879-893

ISSN号:0959-6526

关键字:Warm-mix asphalt (WMA); Reclaimed asphalt pavement (RAP); Rutting; Fatigue; Viscoelastic continuum damage (VECD)

摘要:The combined use of warm-mix asphalt (WMA) technologies and high percentages of reclaimed asphalt pavement (RAP) has become increasingly prevalent in asphalt paving industry due to its promising environmental and economic benefits; however, there remain significant concerns about the performance of WMA-high RAP mixtures. This study was focused on a laboratory investigation that evaluated the effects of two typical WMA additives, i.e., the wax based R and surfactant based M, and various high percentages (from 30% to 70%) of artificial RAP binder on the rutting and fatigue performance of asphalt binders through the recently developed multiple stress creep and recovery (MSCR) and linear amplitude sweep (LAS) tests, respectively. Five asphalt mixtures with different WMA technologies and RAP contents were used to verify the findings from the binder tests through the rutting and flexural fatigue tests. The results showed that the virgin binder always yielded the poorest rutting and fatigue performance. Both RAP binder and M improved the rutting resistance and traffic loading grades of the binders; R remarkably lowered the binder rutting performance, but this impact could be alleviated by properly increasing the RAP binder content. The inclusion of RAP binder enhanced the fatigue resistance of the binders, and so did R and M under most combinations of RAP contents and strain amplitudes. Generally, R performed better than M in improving the binder fatigue resistance. Besides, the LAS predicted results from the dissipated energy based approach generated slightly more conservative predictions than those from the pseudo strain energy based approach. Finally, most of the results for the mixtures exhibited similar trends to those for the binders, but M had different effects on the fatigue performance of the mixtures and binders. (C) 2019 Elsevier Ltd. All rights reserved.