王天笑
|
个人信息Personal Information
助理教授
性别:男
毕业院校:吉林大学
学位:博士
所在单位:化工学院
学科:化学工程
电子邮箱:
Preparation and Corrosion Properties of Dicalcium Phosphate Dihydrate Coating Electrodeposited on AZ31 Mg Alloys
点击次数:
论文类型:期刊论文
发表时间:2021-10-04
发表刊物:Journal of The Electrochemical Society
收录刊物:SCI
卷号:168
期号:10
ISSN号:0013-4651
摘要:In order to solve the problem caused by rapid corrosion of magnesium (Mg) and its alloys in clinical application, dicalcium phosphate dihydrate (DCPD) coatings with different current densities (0.1 mA cm−2, 0.4 mA cm−2, 1.0 mA cm−2) and deposition time (10 min, 30 min, 60 min) were prepared by galvanostatic deposition method with the Mg alloys as the cathode. The effects of current density and deposition time on the structure and composition of coatings were analyzed by scanning electron microscopy, energy dispersive spectrometer, X-ray diffraction. Electrochemical corrosion results showed that the polarization resistance of the 0.4 mA cm−2−30 min sample was 68 times that of Mg alloy. And 7 d of long-term corrosion also confirmed its predominant corrosion resistance (hydrogen evolution was only 1/7 of that of Mg alloy), and better biomineralization ability. This was undoubtedly helpful to improve the mechanical integrity and biocompatibility of Mg alloy, thus enhancing the possibility of their clinical application.
DOI码:10.1149/1945-7111/ac29e0
影响因子:3.3
上一条:Improving the corrosion resistance and biocompatibility of magnesium alloy via composite coatings of calcium phosphate/carbonate induced by silane
下一条:Improvements of Corrosion Resistance and Antibacterial Properties of Hydroxyapatite/Cupric Oxide Doped Titania Composite Coatings on Degradable Magnesium Alloys
