location: Current position: Home >> Scientific Research >> Paper Publications

Effect of direct current pulses on mechanical and electrical properties of aged Cu-Cr-Zr alloys

Hits:

Indexed by:期刊论文

Date of Publication:2016-02-15

Journal:MATERIALS & DESIGN

Included Journals:SCIE、EI

Volume:92

Page Number:135-142

ISSN No.:0264-1275

Key Words:Direct current pulses; Mechanical properties; Electrical conductivity; Precipitation; Synchrotron X-ray radiation; Cu-Cr-Zr alloys

Abstract:In this work, the response of Cu-Cr-Zr alloys to aging under direct current (DC) pulses was investigated. The results demonstrated that well-balanced mechanical properties and electrical conductivity can be achieved in case the alloys were properly treated. The aging behavior of Cu-Cr-Zr alloys is sensitive to DC pulses in the temperature range between 400 and 450 degrees C, whereas at temperatures out of this range, DC pulses have minor influences. The hardness of aged Cu-Cr-Zr alloy is increased by DC pulses while the electrical conductivity is slightly decreased. The peak hardness is increased by 10 HV after aging at 400 C for 1 h. With the imposition of DC pulses, the precipitate size of Cr rich precipitates in aged Cu-Cr-Zr alloys is reduced from 238 nm to 178 nm, exhibiting stronger Orowan strengthening. After aging at 450 degrees C for 2 h with DC pulses, the Cu-Cr-Zr alloy has an average tensile strength of 609 MPa, elongation of 12.8%, and electrical conductivity of 77.6% IACS. A retarding effect of DC pulses on precipitation process is confirmed by synchrotron X-ray diffraction analysis, which is responsible for the slight decrease in electrical conductivity. (C) 2015 Elsevier Ltd. All rights reserved.

Pre One:直接冷却法制备的6009/7050复层板坯的特征演化

Next One:A promising structure for fabricating high strength and high electrical conductivity copper alloys