论文名称：Effects of operating mode and pressure on hydrate-based desalination and CO2 capture in porous media
论文类型：期刊论文
发表刊物：APPLIED ENERGY
收录刊物：SCIE、EI、Scopus
卷号：135
期号：,SI
页面范围：504-511
ISSN号：0306-2619
关键字：Gas hydrate; CO2 capture; Desalination; Porous media
摘要：The purpose of this study was to obtain the characteristics of CO2 hydrate formation and dissociation by using different experimental modes and pressures with glass beads. From the experiments, it was found that hydrate forms rapidly in each cycle, especially at high pressure. Hydrate blockage rarely appeared during hydrate formation and dissociation when applying gas flow (Case 2); this approach was significantly better than the other two experimental modes. The maximum hydrate saturations for the three experimental modes were 28%, 24% and 67.5%. The overall hydrate saturation of Case 3 was significantly better than those of the other two cases. When a heating process was applied to induce hydrate dissociation, the rapid backpressure decrease led to migration of the pore solution during depressurization. The minimal residual water after hydrate formation resulted in consistent residual water saturation after hydrate dissociation for Case 2. Considering hydrate saturation and operating pressure, 5.00 MPa is a better choice for hydrate-based desalination and CO2 capture. If the initial residual solution can be completely converted to hydrate, this technology has potential for industrial applications. (C) 2014 Elsevier Ltd. All rights reserved.
发表时间：2014-12-15