|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：Professor in Process Mechanics
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：制造工艺力学. 工程力学. 计算力学
办公地点：综合实验1号楼619
联系方式：0411-84708432
电子邮箱：zhangz@dlut.edu.cn
扫描关注
- [1]张昭, 陈静远, 郭江川, 李加瑞.The compatible design of wave controlling metamaterial with multi-layers[J],Solid State Communications,2024,394
- [2]张立超, 高翔, 张昭.Simulation of powder transportation in directed energy deposition[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2024,133(5-6):2345-2362
- [3]Guo, J. C., 李加瑞, 董梓杨, Wang, H. Y., 张昭.High strength induced wide band gap formations in additively manufactured cubic metamaterial[J],SMART MATERIALS AND STRUCTURES,2024,33(7)
- [4]张昭, Liu, C. K., Yu, Z. L., Li, J. Y..The fabrication of brass reinforced aluminum matrix composites by FSW[J],JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2024,31:3383-3392
- [5]李加瑞, Guo, J.C., 张昭.Enhanced energy localization and harvesting by design of phononic crystal defects[J],INTERNATIONAL JOURNAL OF MODERN PHYSICS B,2024
- [6]张昭, 周红山, 谭子君, 孔德帅, 王艺飞.The simulation of microstructural evolutions in friction stir additive manufacturing[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2024
- [7]柳占宇, 张威, 于德壮, 杨帆, 李冬园, 张昭.动力集中动车组车体司机室结构优化设计[J],机械科学与技术,2024,43(2):312-317
- [8]孔世宁, 李健宇, 张昭.Molecular Dynamics Simulation of Solution Strengthening of Si and Cu Atoms in Aluminum Alloy[J],Physica Status Solidi (B) Basic Research,2024
- [9]张昭, Tan, Z. J., 王跃方, 任大鑫, Li, J. Y..The relationship between microstructures and mechanical properties in friction stir lap welding o...[J],Materials Chemistry and Physics,296
- [10]Zhang, L., 李加瑞, 郭江川, 张昭.Band Gap Design of Beam-Supported Phononic Crystal by Regulation and Control of Beam Bending Stif...[J],JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES,2024
- [11]张立超, 陈静远, 高翔, 牛方勇, 张昭.Gas-particle-heat dynamic coupling simulation in directed energy deposition[J],International Journal of Mechanical Sciences,2024,275
- [12]高翔, 张立超, 张昭.Compatibility of tool geometry and process parameters in powder bed fusion[J],COMPUTATIONAL PARTICLE MECHANICS
- [13]张昭, 王彬滨, 刘富翰, 张新宇, 刘亚丽.Subregion Based Prediction of Residual States in Friction Stir Welding of Dissimilar Metals[J],COATINGS,2024,13(11)
- [14]孔世宁, 禹泽茏, Zhang, Xinyu, 张昭.Coupling strengthening mechanism of precipitate and solute atoms in edge dislocation motion of Al...[J],Journal of Materials Research and Technology,2024,30:134-145
- [15]张昭.A review on additive manufacturing of wave controlling metamaterial[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2024,124(3-4):647-680
- [16]黄佳, 尹进, 张昭, 张洪武.圆管型局域共振声子晶体三维构型振动带隙研究[J],计算力学学报,2022,3:353-358
- [17]吴奇, 张昭, 张洪武.基于CFD模型的搅拌摩擦焊接搅拌头受力分析[J],机械科学与技术,2022,12:1961-1965
- [18]黄佳, 张昭, 郑勇刚, 张洪武.基于SPH方法的射孔枪射孔过程研究及射孔枪设计[J],测井技术,2022,35(5):487-493
- [19]张昭, 谭治军, Wang, Yifei, 任大鑫.Integrated modeling of microstructure-property-distortion relationship in friction stir additive ...[J],Journal of Thermal Stresses,2024,46(11):1145-1163
- [20]王肇凯, 刘云鹏, 王艺飞, 李加瑞, 张昭.基于拓扑优化设计的动力集中动车组车体变压器梁优化与减重[J],铁道机车车辆,2024,43(05):38-43