王刚

个人信息Personal Information

副教授

硕士生导师

性别:男

毕业院校:大连理工大学

学位:博士

所在单位:化工海洋与生命学院

学科:动力学与控制. 工程力学

办公地点:大连理工大学盘锦校区D07-209-1

联系方式:159-9843-8475

电子邮箱:wanggangdut@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

A differential approach for modeling revolute clearance joints in planar rigid multibody systems

点击次数:

论文类型:期刊论文

发表时间:2017-04-01

发表刊物:MULTIBODY SYSTEM DYNAMICS

收录刊物:SCIE、EI

卷号:39

期号:4

页面范围:311-335

ISSN号:1384-5640

关键字:Planar rigid multibody system; Revolute clearance joint; Non-penetration frictional contact analysis; Impulse-based differential approach; Stronge's hypotheses

摘要:A non-penetration approach of frictional contact analysis is presented for modeling revolute clearance joints of planar rigid multibody systems. In the revolute clearance joint, the motion modes of the journal are divided into three categories, namely, the free motion, collision, and permanent contact modes. The switch between different contact modes is identified by the state of the journal and bearing, including the gap and the normal relative velocity. When impact in the revolute clearance joint is detected, the collision process is simulated by the impulse-based differential approach, where Stronge's improved model for restitution is employed to determine the relative velocity after impact. Instead of algebraic equations, the impact process is described by a set of ordinary differential equations (ODEs), which avoids solving complementarity problems. Moreover, in the permanent contact mode, the constraint-based approach and modified Coulomb's friction law are adopted. The permanent contact mode maintains for most of the time and the governing ODEs are non-stiff. There is general agreement that the constraint-based approach is more efficient than the force-based method. A slider-crank mechanism with a revolute clearance joint is considered as a demonstrative application example where the comparison with the continuous contact force model is investigated.