Indexed by:会议论文
Date of Publication:2008-01-01
Included Journals:CPCI-S
Volume:53-54
Page Number:293-298
Key Words:Invar; Grinding; Residual stress; Structure stability
Abstract:Invar 36 alloy is widely used in manufacturing instruments because of its minimal thermal expansion coefficient. As an important material for the components of precision or super-precision instruments, the process methods for Invar and the structure stability after its machining is necessary. In this paper, the residual stresses of the Invar samples after plane grinding were measured. The experimental results indicate that clear tension stress exists in the surface of Invar alloy along the grinding direction, while, on the cross direction, the states of surface residual stresses are complicated and affected by the parameters of grinding. A typical disk model has been calculated and analyzed by Finite Element Method (FEM), and the deformation caused by surface residual stress was presented. Finally, the effect of grinding as final working procedure on the stability of Invar structure was estimated.
Professor
Supervisor of Doctorate Candidates
Supervisor of Master's Candidates
Title : 国际磨粒技术学会（International Committee of Abrasive Technology, ICAT）委员，中国机械工程学会极端制造分会副主任、生产工程分会常务委员、微纳米制造技术分会常务委员，中国机械工程学会生产工程分会磨粒加工技术专业委员会副主任、切削加工专业委员会常委委员、精密工程与微纳技术专业委员会常委委员，中国机械工程学会特种加工分会超声加工技术委员会副主任，中国机械工程学会摩擦学分会微纳制造摩擦学专业委员会常务委员，中国机械工业金属切削刀具协会切削先进制造技术研究会常务理事、对外学术交流工作委员会副主任、切削先进制造技术研究会自动化加工技术与系统委员会副主任。
Gender:Male
Alma Mater:西北工业大学
Degree:Doctoral Degree
School/Department:机械工程学院
Discipline:Mechanical Manufacture and Automation. Mechatronic Engineering. Manufacturing Engineering of Aerospace Vehicle
Business Address:机械工程学院7191
Open time:..
The Last Update Time:..
