|
个人信息Personal Information
副教授
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：材料科学与工程学院
学科：材料加工工程. 材料表面工程
办公地点：大连甘井子区软件园路80号大连理工大学科技园大厦B座510房间
联系方式：HANDY:13998509875 TEL: 86-411-84706561-8051 FAX: 86-411-84788732 deng@dlut.edu.cn 191753572@qq.com
电子邮箱：deng@dlut.edu.cn
扫描关注
- [1]Liang, Hui, Kang, Huijun, Miao, Junwei, Gao, Bingyang, Deng, Dewei, Wang, Tongmin, Lu, Yiping, Cao, Zhiqiang, Jiang, Li, Tingju.Microstructure and tribological properties of AlCrFe2Ni2W0.2Mo0.75 high-entropy alloy coating p...[J],SURFACE & COATINGS TECHNOLOGY,2020,400
- [2]Li, Yaning, Deng, Dewei, Jiang, Hui, Cao, Zhiqiang, Liang, Nie, Qiuxin, Qi, Zhaoxin, ZQ (corresponding author), Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Solidificat Control & Digital Preparat Te, Dalian 116024, Peoples R China., Cao, Ningbo Inst Dalian Univ Technol, New Mat Innovat Ctr, Ningbo 315000.Microstructures and Wear Resistance of CoCrFeNi2V0.5Tix High-Entropy Alloy Coatings Prepared by...[J],CRYSTALS,2020,10(5)
- [3]邓德伟, 焦咏翔, 黄治冶, 孙奇, 田鑫.17-4PH泵轴弯曲失效原因分析[J],石油化工设备技术,2020,41(1):19-22
- [4]Lu, Tong, Tan, Yi, Deng, Dewei, Li, Jiayan, Y (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, 2 Linggong Rd, Dalian 116023, Peoples R China..Recycling of silicon powder waste cut by a diamond-wire saw through laser-assisted vacuum smelt...[J],JOURNAL OF CLEANER PRODUCTION,2018,203:574-584
- [5]Deng, D.W., Tian, X., Zhang, C.P., Lu, J., DW (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Failure analysis of axle sleeve made from 2cr13 steel[J],Advanced Materials Research,2012,591-593:904-907
- [6]Liang, Hui, Yao, Hongwei, Qiao, Dongxu, Nie, Shuang, Lu, Yiping, Deng, Dewei, Cao, Zhiqiang, Wang, Tongmin.Microstructures and Wear Resistance of AlCrFeNi2W0.2Nbx High-Entropy Alloy Coatings Prepared by...[J],JOURNAL OF THERMAL SPRAY TECHNOLOGY,2019,28(6):1318-1329
- [7]耿延朝, 邓德伟, 田鑫, 孙奇.焊接电流对镍基铌复合堆焊层组织及性能的影响[J],理化检验-物理分册,2019,55(4):240-243
- [8]耿延朝, 邓德伟, 田鑫, 孙奇.铌元素含量对等离子堆焊镍基合金的影响[J],热加工工艺,2019,11:28-31
- [9]Zhang, Nan, Liu, Weiwei, Deng, Dewei, Tang, Zijue, Xuyang, Yan, Zhaorui, Hongchao, WW (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China..Effect of electric-magnetic compound field on the pore distribution in laser cladding process[J],OPTICS AND LASER TECHNOLOGY,2018,108:247-254
- [10]Wang, Xinlin, Deng, Dewei, Hu, Yingbin, Ning, Fuda, Hui, Cong, Weilong, Zhang, Hongchao, WL (reprint author), Texas Tech Univ, Dept Ind Mfg & Syst Engn, Lubbock, TX 79409 USA..Overhang structure and accuracy in laser engineered net shaping of Fe-Cr steel[J],OPTICS AND LASER TECHNOLOGY,2018,106:357-365
- [11]邓德伟, 牛婷婷, 田鑫, 刘海英, 孙奇, 张林.水导轴承等离子堆焊Ni60合金组织及其耐腐蚀性能[J],材料工程,2018,46(5):106-111
- [12]王鑫林, 邓德伟, 张洪潮.Effects of mass energy and line mass on characteristics of the direct laser fabrication parts[J],Rapid Prototyping Journal,2018,24(2):270-275
- [13]贾华, 邓德伟, 刘海英, 范学东, 常占东, 何涛, 刘海波, 孙奇, 黄琴.铸造奥氏体不锈钢强磁性原因及解决措施[J],铸造,2017,66(9):931-934
- [14]Wang, Xinlin, Deng, Dewei, Hu, Yingbin, Liu, Zhichao, Zhang, Hongchao, DW (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian, Liaoning, Peoples R China..Analytical modeling and experimental investigation of laser clad geometry[J],OPTICAL ENGINEERING,2017,56(9)
- [15]邓德伟, 刘倩倩, 李晓娜, 于涛, 张林, 王罡, 张洪潮, Deng, DW (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116023, Peoples R China..脉冲电流对再制造毛坯裂纹尖端组织及性能的影响[J],稀有金属材料与工程,2017,46(08):2208-2213
- [16]邓德伟, 刘海英, 张林, 孙奇, 杨树华, 宋茂付, 郑海彤, 张敏.电流对等离子堆焊Fe90组织与性能的影响[J],材料热处理学报,2017,38(7):138-144
- [17]邓德伟, 刘海英, 张林, 孙奇, 杨树华, 宋茂付, 郑海彤, 张敏.深层渗碳对H13钢显微组织和硬度的影响[J],材料热处理学报,2017,38(3):186-192
- [18]邓德伟, 张洪潮, 刘倩倩, 李晓娜, 于涛, 张林, 杨树华.脉冲电流对Inconel 625合金裂纹尖端组织及性能的影响[J],金属热处理,2017,42(3):52-56
- [19]邓德伟, 于涛, 张林, 杨树华, 张洪潮.脉冲电流-激光复合愈合钛合金深层裂纹微观组织研究[J],机械工程学报,2017,53(20):38-44
- [20]邓德伟, 李晓娜, 张洪潮.脉冲电流对Inconel625裂纹尖端组织及性能的影响[J],金属热处理,2017,42(3):223-228