location: Current position: Home >> Scientific Research >> Paper Publications

Optical up-converted single-sideband generation using intensity modulators and fiber gratings

Hits:

Indexed by:期刊论文

Date of Publication:2013-02-01

Journal:OPTICAL ENGINEERING

Included Journals:SCIE

Volume:52

Issue:2

ISSN No.:0091-3286

Key Words:optical single sideband; frequency up conversion; wavelength reuse; radio over fiber

Abstract:A novel method is proposed for optical up-converted single-sideband (OSSB) signal generation in radio over fiber links, which can realize optical carrier reuse synchronously. The OSSB signal is generated in order to overcome the fiber dispersion problem by using two intensity modulators in combination with fiber gratings. With this up-conversion technique, a 25 GHz OSSB radio frequency signal is generated by mixing an intermediate frequency signal (5 GHz) and low frequency local oscillator signal (10 GHz). The signal is transmitted over 25 km standard single-mode fiber successfully. And the received signal error vector magnitude is 5.8% root mean square, with eye diagram widely open. (C) 2013 Society of Photo-Optical Instrumentation Engineers (SPIE) [DOI: 10.1117/1.OE.52.2.025008]

Pre One:Influence of coupling conditions on the time delay characteristics of parallel-cascaded optical waveguide ring resonators

Next One:Optical approach for measuring unknown microwave frequency with improved sensitivity