张振宇

个人信息Personal Information

教授

博士生导师

硕士生导师

性别:男

毕业院校:天津大学

学位:博士

所在单位:机械工程学院

学科:机械制造及其自动化. 机械设计及理论

办公地点:机械工程学院知方楼5055

联系方式:zzy@dlut.edu.cn

电子邮箱:zzy@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Microstructure and mechanical properties of CeO2 doped diamond-like carbon films

点击次数:

论文类型:期刊论文

发表时间:2008-03-01

发表刊物:DIAMOND AND RELATED MATERIALS

收录刊物:SCIE、EI

卷号:17

期号:3

页面范围:396-404

ISSN号:0925-9635

关键字:DLC; CeO2; unbalanced magnetron sputtering; mechanical properties

摘要:A kind of rare earth oxide, CeO2, was doped into the diamond-like carbon (DLC) films with thickness of 180-200 nm, using unbalanced magnetron sputtering. All the adhesion strength Of CCO2 doped DLC films is increased, while the residual compressive stress is obviously decreased compared to pure DLC film. Specially, the residual compressive stress of the deposited films are reduced by 90%, when the CeO2 content is in the range of 5-7%, from a value of about 4.1 GPa to 0.5 GPa. When the CCO2 content is increased to 10%, the deposited films possess the highest adhesion strength of 85 mN, 37% higher than that of pure DLC film. The nanohardness and elastic modulus exist a transition point at 8% Of CCO2 content within the DLC film. Before this value, nanohardness and elastic modulus of CCO2 doped DLC films are lower than those of pure DLC film, and after this value, they are higher or adjacent to those of pure DLC film. Auger electron spectroscopy shows a more widened interface of 6% CeO2 doped DLC film compared to pure DLC film. The enhancement of adhesion strength is mainly attributed to the widening of the film-substrate interface, as well as the decrease of residual compressive stress. (C) 2008 Elsevier B.V. All rights reserved.