Hits:

Indexed by:会议论文

Date of Publication:2015-06-15

Included Journals:EI、CPCI-S、Scopus

Page Number:353-364

Key Words:Structural analysis; floating pipes; finite element method; hydrodynamic model

Abstract:A numerical model is developed to investigate the structural performance and stress distribution of floating pipes of fish cage subjected to the flow. The modeling approach is based on the joint use of the finite element method using the shell elements to simulate the floating pipes and the hydrodynamic force model improved from the Morison's equation and lumped-mass method. The hydrodynamic response of the fish cage and forces on the floating pipes can be obtained by the Morison's equation and lumped-mass method. The stress and deformation of the floating pipes can be evaluated using the finite element method. Using an appropriate iterative scheme, the stress distribution and maximum stress of the floating pipes can be obtained using the proposed model. To validate the numerical model, the numerical results were compared with the data obtained from corresponding physical model tests. The comparisons show the numerical results agree well with the experimental data. On that basis, the simulations of floating pipes in currents are performed to investigate the maximum stress and the critical locations. Simulations of the fish cage in different flow velocity are performed. The effect of the velocity on the deformations and stress of the floating pipes is analyzed. The simulations results show that the stress and deformations drastically increases with the increase of flow velocity. Comparing results of floating pipes with different mooring line arrangements indicates that increasing mooring lines can efficiently lower the stress of the floating pipes. The simulation of the SPM cage system with multiple net cages in current is preformed and the results show the middle cage is most dangerous for the tripartite-cage system.