LoOSTrnu1nmoJ2AlWGepnUVKvGSt25Xhj4TbLzzdykAufbF5N4hMQtDgyXQY
Current position: Home >> Scientific Research >> Paper Publications

All-silica fiber EFPI high static pressure sensor in fusion with simple structure

Release Time:2019-03-11  Hits:

Indexed by: Journal Article

Date of Publication: 2016-10-10

Journal: Zhongguo Jiguang/Chinese Journal of Lasers

Included Journals: Scopus、ISTIC、PKU、EI

Volume: 43

Issue: 10

ISSN: 02587025

Abstract: All-silica fiber extrinsic Fabry-Perot interferometer (EFPI) high static pressure sensor in fusion with simple structure is introduced. The pressure effect of the sensor is theoretically analyzed, and the design structure and manufacturing process of the sensor are given. The sensor has some advantages such as long cavity length, simple structure, simple manufacturing process, convenience and flexibility in application comparing with traditional EFPI sensor, while it can be used in the measurement of higher static pressure. Sensing demodulation system is set up to conduct a pressure test. The results show that the system has high measuring precision and good stability. Meanwhile, the temperature sensitivity measuring experiment is conducted. Temperature sensibility coefficient is about 0.72 nm/   and the cavity length-temperature has good linearity. The results show that the sensor has a low temperature crossing sensitivity. In specific pressure of 0~20 MPa, pressure cavity length sensitivity of the sensor can reach 21 nm/MPa. Measuring deviation is 0.2%FS with continuous dynamic measurement of 10 h. ? 2016, Chinese Lasers Press. All right reserved.

Prev One:Glycoprotein detection by using the surface plasmon resonance technology

Next One:Dual-Channel Fiber-Optic Biosensor for Self-Compensated Refractive Index Measurement