location: Current position: Home >> Scientific Research >> Paper Publications

Research on distribution of aluminum in electron beam melted silicon ingot

Hits:

Indexed by:期刊论文

Date of Publication:2013-10-01

Journal:VACUUM

Included Journals:SCIE、EI

Volume:96

Page Number:27-31

ISSN No.:0042-207X

Key Words:Electron beam melting; Silicon; Aluminum; Evaporation; Segregation

Abstract:The purification of metallurgical grade silicon, especially the removal of aluminum, was investigated by electron beam melting and solidification. Small amounts of silicon raw materials were melted in an electron beam furnace with same melting time and different solidification time to obtain the distribution of Al in silicon ingot. The removal mechanisms in different stages were also discussed. The results show that the removal of Al during melting process only depends on evaporation and that during solidification process depends on both segregation and evaporation. The distribution of Al shows an obvious increasing trend from the bottom to the top of the silicon ingot when solidification time is 600 s. The removal efficiency in most area is close to that in the ingot solidified instantaneously, but the energy consumption is less, which is considered to be an effective way for the purification of silicon. (c) 2013 Elsevier Ltd. All rights reserved.

Pre One:均匀球形金属玻璃粒子的制备及冷却速率评价

Next One:Numerical simulation for parameter optimization of silicon purification by electron beam melting