location: Current position: Home >> Scientific Research >> Paper Publications

Kinetics of intermetallic compound layers and shear strength in Bi-bearing SnAgCu/Cu soldering couples

Hits:

Indexed by:期刊论文

Date of Publication:2009-04-03

Journal:JOURNAL OF ALLOYS AND COMPOUNDS

Included Journals:SCIE、EI

Volume:473

Issue:1-2

Page Number:382-388

ISSN No.:0925-8388

Key Words:Kinetics; Intermetallic; Shear strength; Solder

Abstract:Three lead-free solder alloys, Sn-3Ag-0.5Cu, Sn-3Ag-0.5Cu-1 Bi and Sn-3Ag-0.5Cu-3Bi, have been used to solder with Cu substrate in the current experiments to investigate the influence of Bi on the kinetics of intermetallic compound (IMC) layer growth and shear strength of the soldering couples. The experimental results indicate that the thickness of IMC layer at the solder/Cu interface increases with aging process. The addition of Bi delays the propagation rate of total IMC layer. For the samples aged at 140 degrees C up to 500 h. their shear strengths keep at a relative stable level where the fracture occurs in bulk solder side and the addition of Bi improve the strength level, while for the samples aged at 195 degrees C, the shear strengths decrease continuously with aging time where the fracture occurs along interface between IMC layers and solders and the influence of Bi can be negligible. (C) 2008 Elsevier B.V. All rights reserved.

Pre One:Effect of high magnetic field on the morphology of (Cu, Ni)(6)Sn-5 at Sn0.3Ni/Cu interface

Next One:低稳恒磁场对锡锌基合金液与铜片界面反应的影响