location: Current position: Home >> Scientific Research >> Paper Publications

Preparation and application of titanium dioxide dynamic membranes in microfiltration of oil-in-water emulsions

Hits:

Indexed by:期刊论文

Date of Publication:2012-03-22

Journal:SEPARATION AND PURIFICATION TECHNOLOGY

Included Journals:SCIE、EI、Scopus

Volume:89

Page Number:78-83

ISSN No.:1383-5866

Key Words:Dynamic membrane; Carbon support; Oil-in-water emulsion; Steady flux decay ratio; Intermediate blocking filtration

Abstract:An experimental investigation was carried out on preparation and application of titanium dioxide dynamic membranes in separation of oil-in-water emulsions via. crossflow microfiltration. The dynamic membrane was formed on a porous carbon tube support. Effects of preparation factors on oil-in-water emulsion separation were studied and the optimal preparation conditions were determined using orthogonal experiments. The dynamic membrane prepared under the optimal conditions was characterized to be uniform, dense and hydrophilic. Experimental results show that oil rejection efficiencies are all higher than 98% with the permeate concentrations less than 8.3 mg/l. The steady permeate flux increases at first, and then decreases with increase in the average support pore size. A novel concept, the steady flux decay ratio (FDR) of dynamic membrane was proposed for the first time as an indicator of anti-fouling ability of dynamic membrane in this work. Analysis displays that the steady FOR first increases and then decreases with increase in the support pore size during which the dynamic membrane type changes from the complete blocking filtration type to the intermediate blocking filtration type. As the pore size increases, the steady permeate flux of dynamic membranes has a slow decline during intermediate blocking filtration of the oil-in-water emulsion. (C) 2012 Elsevier B.V. All rights reserved.

Pre One:Two-Dimensional Mathematical Modeling of Heat and Mass Transfer in Fluidized-Bed Drying of Porous Ma

Next One:流化床氛围下多孔物料干燥传热传质的数值模拟