![]() |
个人信息Personal Information
教授
博士生导师
硕士生导师
性别:男
毕业院校:大连理工大学
学位:博士
所在单位:机械工程学院
学科:机械制造及其自动化
办公地点:大连理工大学机械工程学院知方楼5009
联系方式:pzhou@dlut.edu.cn
电子邮箱:pzhou@dlut.edu.cn
扫描关注
- [61]周平, 闫英, 黄宁, Wang, Ziguang, 康仁科, 郭东明.Residual Stress Distribution in Silicon Wafers Machined by Rotational Grinding[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING TRANSACTIONS OF THE ASME,2022,139(8)
- [62]王科, 闫英, 周平, 张超, 康仁科, 郭东明.Preparation of Flat and Smooth Copper Surface by Jet Electrochemical Machining and Electrochemi...[J],JOURNAL OF THE ELECTROCHEMICAL SOCIETY,2022,167(16)
- [63]王林, 周平, 闫英, 康仁科, 郭东明.Physically-based modeling of pad-asperity scale chemical-mechanical synergy in chemical mechani...[J],TRIBOLOGY INTERNATIONAL,2022,138:307-315
- [64]陈霄, 周平, 康仁科, 董志刚.Numerical study on thermal deformation characteristic of water-cooled mirror with interdigitate...[J],APPLIED THERMAL ENGINEERING,2022,98:357-364
- [65]周平, 康仁科, Shi, Kang, 郭东明, Shan, Kun, 李喆.Numerical studies on scavenging reaction in confined etchant layer technique (CELT)[J],JOURNAL OF ELECTROANALYTICAL CHEMISTRY,2022,705:1-7
- [66]周平, 闫英, 康仁科, 郭东明.Nonlinear Compression Behavior of the Grooved Polishing Pad: AModel and Its Validation[J],ECS Journal of Solid State Science and Technology,2022
- [67]Lin, P., 周平, 吴成伟.Multi-objective topology optimization of end plates of proton exchange membrane fuel cell stack...[J],JOURNAL OF POWER SOURCES,2022,196(3,SI):1222-1228
- [68]闫英, Wang, Yonghao, 周平, 黄宁, 郭东明.Near-field microscopy inspection of nano scratch defects on the monocrystalline silicon surface[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,56:506-512
- [69]周平, 王泽红, 韩晓龙, 金洙吉.超薄石英片抛光加工胶结固持变形[J],光学精密工程,2022,27(11):2402-2409
- [70]任晓, 吴成伟, 周平.粗糙表面的气体密封性能研究[J],机械工程学报,2022,16:176-181
- [71]李治伟, 周平, 金洙吉.粗糙薄层弹性体接触刚度分析[J],摩擦学学报,2022,1:53-58
- [72]周平, 郭东明, 康仁科, 金洙吉.电化学机械平坦化抛光垫混合软弹流润滑行为数值研究[J],机械工程学报,2022,7:180-185
- [73]左云盛, 闫英, 周平, 王可, 郭民政.Cu2+浓度对于铜电致化学抛光过程的影响[A],2016年全国电化学加工技术研讨会,2022,7-12
- [74]王林, 周平, 闫英, 张璧, 康仁科, 郭东明.Chemical-mechanical wear of monocrystalline silicon by a single pad asperity[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE,2022,120:61-71
- [75]张振宇, 王博, 周平, 郭东明, 康仁科, 张璧.A novel approach of chemical mechanical polishing using environment-friendly slurry for mercury...[J],Scientific Reports,2022,6:22466
- [76]张振宇, 王博, 周平, 康仁科, 张璧, 郭东明.A novel approach of chemical mechanical polishing for cadmium zinc telluride wafers[J],Scientific Reports,2022,6:26891
- [77]Cai, Jiqing, 周平, 康仁科, Shan, Kun, 郭东明.A novel method for micro-gap control in electrogenerated chemical polishing[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,41:96-101
- [78]郭晓光, 金洙吉, 周平.An FEM-SPH Coupling Model for Ultra-precision Cutting of AL6061[A],The 9th Cooperative and Joint International conference on Ultra-precision Machining Process, in conjuntion with the 7th Conference of Ultra-precision (ELId) Technology Research Group,2022,1(1):77-81
- [79]周平, 郭东明, 康仁科, 金洙吉.Analysis of Laminar Flow Over a Non-Conventional Random Rough Surface Based on Lattice Boltzman...[J],JOURNAL OF TRIBOLOGY TRANSACTIONS OF THE ASME,2022,134(1)
- [80]Shan, Kun, 周平, Zuo, Yunsheng, 康仁科, 郭东明.Analysis of the polishing ability of electrogenerated chemical polishing[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,47:122-130