|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
学科：机械制造及其自动化
办公地点：大连理工大学机械工程学院知方楼5009
联系方式：pzhou@dlut.edu.cn
电子邮箱：pzhou@dlut.edu.cn
扫描关注
- [81]林彬, 周平, Wang, Ziguang, 闫英, 康仁科, 郭东明.Analytical Elastic Plastic Cutting Model for Predicting Grain Depth-of-Cut in Ultrafine Grindin...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING TRANSACTIONS OF THE ASME,2022,140(12)
- [82]周平, 郭东明, 康仁科, 金洙吉.A mixed elastohydrodynamic lubrication model with layered elastic theory for simulation of chem...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,69(5-8):1009-1016
- [83]周平, 董志刚, 康仁科, 金洙吉, 郭东明.A mixed elastohydrodynamic lubrication model for simulation of chemical mechanical polishing wi...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,77(1-4):107-116
- [84]周平, Xu, Shance, Wang, Ziguang, 闫英, 康仁科, 郭东明.A load identification method for the grinding damage induced stress (GDIS) distribution in sili...[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE,2022,107:1-7
- [85]Wang, Ziguang, 闫英, 周平, 司立坤, 康仁科, 郭东明.A high-efficient precision grinding for fabricating moderately thick plane mirror (MTPM)[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2022,96(5-8):2559-2566
- [86]Lin, P., 周平, 吴成伟.A high efficient assembly technique for large proton exchange membrane fuel cell stacks: Part I...[J],JOURNAL OF POWER SOURCES,2022,195(5):1383-1392
- [87]Pan, Yuhang, Wang, Yonghao, 周平, 闫英, 郭东明.Activation functions selection for BP neural network model of ground surface roughness[J],JOURNAL OF INTELLIGENT MANUFACTURING,2022,31(8):1825-1836
- [88]兰天, 周平, 闫英.一种基于等效平行间隙的静密封漏率预测方法[J],润滑与密封,2022,45(3):102-106
- [89]周平, 吴成伟.Liquid water transport mechanism in the gas diffusion layer[J],JOURNAL OF POWER SOURCES,2022,195(5):1408-1415
- [90]Shan, Kun, 周平, Cai, Jiqing, 康仁科, Shi, Kang, 郭东明.Electrogenerated chemical polishing of copper[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,39:161-166
- [91]Li, Weisi, 周平, Lin, Wei-Chen, Nteziyaremye, Valens, Yamaguchi, Hitomi, 郭东明, Shih, Albert.Effects of needle inner surface topography on friction and biopsy length[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2022,119:412-418
- [92]黄宁, 闫英, 周平, 康仁科, 郭东明, Goel, Saurav.Elastic recovery of monocrystalline silicon during ultra-fine rotational grinding[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,65:64-71
- [93]闫英, 周平, Zhang, Shang-Xiong, 郭晓光, 郭东明.Effect of substrate curvature on thickness distribution of polydimethylsiloxane thin film in sp...[J],Chinese Physics B,2022,27(6)
- [94]周平, Lin, P., 吴成伟, 李贞.Effect of nonuniformity of the contact pressure distribution on the electrical contact resistan...[J],INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2022,36(10):6039-6044
- [95]王科, 闫英, 周平, Shi, Kang, 郭东明.Effect of cupric ion concentration on the etching behavior of copper in Electrogenerated Chemic...[J],PRECISION ENGINEERING JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEE,2022,55:70-76
- [96]Hu, Rui, 陈文炯, Li, Quhao, 刘书田, 周平, 董志刚, 康仁科.Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture...[J],JOURNAL OF AEROSPACE ENGINEERING,2022,30(3)
- [97]吴成伟, 马国军, 周平.流体流动的边界滑移问题研究进展[J],力学进展,2022,3:265-282
- [98]周平, 吴成伟, 于平.平纹织物复合材料横向力学性能研究[J],复合材料学报,2022,3:170-175
- [99]周平, 郭东明, 康仁科, 金洙吉.多级粗糙间隙内的两相微流动数值模拟[J],机械工程学报,2022,15:83-88
- [100]周平, 郭东明, 金洙吉, 康仁科.多级粗糙表面对抛光液微流动影响的数值分析[J],机械工程学报,2022,9:169-174