|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
学科：机械制造及其自动化
办公地点：大连理工大学机械工程学院知方楼5009
联系方式：pzhou@dlut.edu.cn
电子邮箱：pzhou@dlut.edu.cn
扫描关注
- [161]周平, 戴恒震, 金洙吉, 王宇, 康仁科, 郭东明, Zhou, Ping.周向波度密封环预变形平面研磨加工中的变形分析[J],机械工程学报,2014,51(11):171-176
- [162]刘博, 金浩, 周平, 吴承伟, 李洪武, 孙占春, Zhou, P.(pzhou@dlut.edu.cn).非圆胀圈型密封环的设计方法与性能分析[J],北京理工大学学报,2014,34(3):245-249
- [163]Zhou, Ping, Guo, Dongming, Kang, Renke, Jin, Zhuji, P (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..A mixed elastohydrodynamic lubrication model with layered elastic theory for simulation of chem...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,69(5-8):1009-1016
- [164]周平, 赵杰, 李治伟, 金洙吉, 柳滨, Zhou, P.(pzhou@dlut.edu.cn).化学机械平坦化中晶圆姿态瞬态调整的数值模拟研究[J],机械工程学报,2013,50(1):199-204,212
- [165]Zhou, Ping, Shan, Kun, Li, Zhe, Kang, Renke, Shi, Kang, Guo, Dongming, P (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Numerical studies on scavenging reaction in confined etchant layer technique (CELT)[J],JOURNAL OF ELECTROANALYTICAL CHEMISTRY,2013,705:1-7
- [166]刘书田, 胡瑞, 周平, 董志刚, 康仁科, Liu, S.-T.(stliu@dlut.edu.cn).基于筋板式基结构的大口径空间反射镜构型设计的拓扑优化方法[J],光学精密工程,2013,21(7):1803-1810
- [167]张文龙, 周平, 吴承伟, Wu, C.(cwwu@dlut.edu.cn).微柱和微管阵列结构表面的抗热冲击特性[J],力学学报,2013,45(2):223-228
- [168]郭晓光, 金洙吉, 周平.An FEM-SPH Coupling Model for Ultra-precision Cutting of AL6061[A],2013,1(1):77-81
- [169]肖桂仲, 周平, 李云鹏, 陈飙松.基于SiPESC平台的雷诺方程有限元分析与软件研发[A],2012,1-8
- [170]时康, 田中群, 张红万, 单坤, 王文婧, 王成, 周剑章, 康仁科, 周平.基于氧化还原软物质超薄层的约束刻蚀层技术[A],2012,1-1
- [171]周平, 郭东明, 康仁科, 金洙吉, Zhou, P.(pzhou@dlut.edu.cn).电化学机械平坦化抛光垫混合软弹流润滑行为数值研究[J],机械工程学报,2012,48(7):180-185
- [172]周平, 康仁科, 金洙吉, 郭东明.Simulation of CMP Process Based on Mixed Elastohydrodynamic Lubrication Model with[A],2012
- [173]董志刚, 周平, 康仁科, 郭东明.Grinding performance evaluation of the developed chemo-mechanical grinding (CMG) tools for sapphi...[A],2012,565:105-110
- [174]Zhou, Ping, Guo, Dongming, Kang, Renke, Jin, Zhuji, P (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Analysis of Laminar Flow Over a Non-Conventional Random Rough Surface Based on Lattice Boltzman...[J],JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME,2012,134(1)
- [175]张文龙, 周平, 吴承伟.仿生微结构表面的抗热冲击特性[A],2011,1-8
- [176]周平, 郭东明, 康仁科, 金洙吉, Zhou, P.(pzhoug.zj.cn@gmail.com).多级粗糙间隙内的两相微流动数值模拟[J],机械工程学报,2011,47(15):83-88
- [177]周平, 郭东明, 金洙吉, 康仁科, Zhou, P.(pzhoug.zj.cn@gmail.com).多级粗糙表面对抛光液微流动影响的数值分析[J],机械工程学报,2011,47(9):169-174
- [178]Zhou, P., Lin, Wu, C. W., Li, Z., CW (reprint author), Dalian Univ Technol, Fac Vehicle Engn & Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Effect of nonuniformity of the contact pressure distribution on the electrical contact resistan...[J],INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2011,36(10):6039-6044
- [179]Lin, P., Zhou, Wu, C. W., CW (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Fac Vehicle Engn & Mech, Dalian 116024, Peoples R China..Multi-objective topology optimization of end plates of proton exchange membrane fuel cell stack...[J],JOURNAL OF POWER SOURCES,2011,196(3,SI):1222-1228
- [180]He W., Wang Y., Zhao F., Zhou P..Evaluation method for 3D topography of CFRP cutting surfaces based on multifractals spectrum and ...[A],2010,2354-2357