|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
学科：机械设计及理论. 机械电子工程
电子邮箱：huojunzhou@dlut.edu.cn
扫描关注
论文成果
当前位置: 复杂机电系统创新设计 >> 科学研究 >> 论文成果- [21]霍军周, 周林伟, 朱冬, 张伟, 王伟政, 孙伟, Huo, Junzhou(huojunzhou@dlut.edu.cn).复合式土压平衡盾构机刀盘开口模式设计[J],哈尔滨工程大学学报,2017,38(3):433-439
- [22]Li, Tao, Wu, Hanyang, Zhu, Dong, Meng, Zhichao, Huang, Xiaoqi, Huo, Junzhou.Dynamic characteristics and experimental research of locomotive wheelset[A],2017,167-170
- [23]孙伟, 宋学官, 霍军周.Modeling and Simulation of Hoist Rope for Excavator Based on Virtual Prototype[A],2017,873-887
- [24]孙伟, 朱烨, 霍军周, 黄晓琦.基于裂纹失效区域划分的TBM刀盘裂纹位置预估及分析[J],机械工程学报,2017,54(1):27-35
- [25]徐兆辉, 张占葛, 李多, 霍军周.Factor analysis of bearing temperature distribution based on thermal network model[J],International Journal of Smart Engineering,2017
- [26]张占葛, 朱冬, 李多, 霍军周.Friction Properties of Axlebox Bearing Based on Quasi-static Theory and Elastohydrodynamic Lubric...[J],International Journal of Smart Engineering,2017
- [27]吴瀚洋, 朱冬, 霍军周.The Main Driving System Vibration Analysis Under Different Rotating Speed Of TBM Cutterhead[A],2017
- [28]Zhu, Zhudong, Chen, Kui, Huang, Xiao-Qi, Hou, Nan, Wang, Wei-Zheng, Huo, Jun-Zhou.Finite Element Analysis of a New Welding Structure of Cutter Mount in TBM[A],2017,105:908-915
- [29]Huo, Junzhou, Zhu, Dong, Hou, Nan, Sun, Wei, Dong, Jianghui, W, JH (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China., Sun, Univ South Australia, Sch Nat & Built Environm, Adelaide, SA 5095, Australia..Application of a small-timescale fatigue, crack-growth model to the plane stress/strain transit...[J],ENGINEERING FAILURE ANALYSIS,2017,71:11-30
- [30]Huo, Junzhou, Hou, Nan, Sun, Wei, Wang, Liping, Dong, Jianghui, W (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian 116024, Peoples R China., Dong, JH (reprint author), Univ South Australia, Sch Nat & Built Environm, Adelaide, SA 5095, Australia..Analyses of dynamic characteristics and structure optimization of tunnel boring machine cutter ...[J],NONLINEAR DYNAMICS,2017,87(1):237-254
- [31]Zhang, Chunguang, Qu, Fuzheng, Guo, Li, Huo, Junzhou, Xie, Zhengyi, CG (reprint author), Dalian Univ Technol, Sch Mech Engn, Dalian, Peoples R China..Influence of cutterhead system structure on load distribution and life of main bearing[J],JOURNAL OF VIBROENGINEERING,2016,18(7):4164-4177
- [32]欧阳湘宇, 孙伟, 霍军周.多点分布载荷作用下TBM刀盘裂纹萌生寿命预测[J],机械科学与技术,2016,35(10):1484-1488
- [33]Wu, Hanyang, Huo, Junzhou, Zhang, Wei, Zhu, Dong, Hou, Nan.An electromechanical coupling model of TBM's main driving system[A],2016
- [34]孙伟, 朱晔, 凌静秀, 霍军周, Zhu, Ye(zhuye198727@163.com).基于裂纹失效区域的分体式刀盘可靠性计算[J],东北大学学报（自然科学版）,2016,37(8):1144-1148
- [35]霍军周, 李广庆, 吴瀚洋, 孙伟, 孙晓龙, Huo, Junzhou(huojunzhou@dlut.edu.cn).TBM刀盘缩尺试验台设计及其静动态特性分析[J],哈尔滨工程大学学报,2016,37(5):713-717,723
- [36]凌静秀, 孙伟, 霍军周, 李广庆, Ling, Jingxiu(ljxyxj@mail.dlut.edu.cn).TBM 刀盘系统动态特性及参数影响[J],哈尔滨工程大学学报,2016,37(4):598-602
- [37]霍军周, 孙伟.Application of a small-timescale fatigue, crack-growth model to the plane stress/strain transitio...[J],Engineering Failure Analysis,2016,71(1):11-30
- [38]霍军周, 李广庆, 吴瀚洋, 孙伟, 孙晓龙.基于相似理论的TBM刀盘缩尺试验台设计及其静动态特性对比分析[J],哈尔滨工程大学学报,2016,37(5):713-717
- [39]Wang W.Z., Zhou J.J., Zhu D., Wu H.Y., Wang Y.J., Huo J.Z..Dynamics analysis of flexible shaft wheel-rail SYSTWM[A],2016,355-359
- [40]霍军周, 吴瀚洋, 赵奎山, 李涛, Huo, Jun-Zhou(huojunzhou@dlut.edu.cn).基于滚刀系统耦合动力学的轴承修形设计[J],东北大学学报（自然科学版）,2015,36(12):1776-1779