location: Current position: Aimin Wu >> Scientific Research >> Paper Publications

Fabrication and its characteristics of low-temperature polycrystalline silicon thin films

Hits:

Indexed by:期刊论文

Date of Publication:2009-01-01

Journal:Science in China Series E-Technological Sciences

Included Journals:SCIE、EI

Volume:52

Issue:1

Page Number:260-263

ISSN No.:1006-9321

Key Words:ECR-PECVD; poly silicon; low temperature; glass substrate

Abstract:In order to reduce the cost of solar cells or flat-panel display, it is very important to synthesis poly-crystalline silicon films on low cost substrate such as glass at low temperature. In this work, electron cyclotron resonance (ECR) plasma enhanced chemical vapor deposition (PECVD) system was successfully applied to synthesize poly-Si thin-film on common glass substrate using H(2) as the plasma source and SiH(4) (Ar:SiH(4) = 19:1) as the precursor gas at low temperature. Since the multicusp cavity-coupling ECR plasma source was adopted to provide active precursors, the growth temperature decreased to lower than 200 degrees C. In the plasma, the electron temperatures kT(e) are similar to 2-3 eV and the ion temperatures kT(i) <= 1 eV. This leads to non-remarkable ion impacts during the film deposition. The characteristic of poly-Si films was investigated. It was shown that the crystalline fraction X(c) of the films can be up to 90% even deposit at room temperature, and the film was (220) preferably oriented. The growth behaviors of the film between the interface of glass and Si films were also discussed in detail.

Pre One:Effect of substrate temperature on the growth of polycrystalline Si films deposited with SiH4+Ar

Next One:氮气流量对玻璃衬底上低温沉积GaN薄膜结晶性的影响