|
个人信息Personal Information
教授
博士生导师
硕士生导师
任职 : 工业装备结构分析优化与CAE软件全国重点实验室主任、结构优化理论与应用国际联合研究中心主任
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：力学与航空航天学院
学科：工程力学. 计算力学. 结构工程. 车辆工程
办公地点：力学楼302
联系方式：0411-84707267 ligang@dlut.edu.cn
电子邮箱：ligang@dlut.edu.cn
扫描关注
- [61]胡浩, 李刚, Li, G., Department of Engineering Mechanics, State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of TechnologyChina.演化算法求解桁架多目标拓扑优化的收敛速度研究[J],计算力学学报,2015,32(3):301-306
- [62]李刚, 李彬, 郝鹏, 王博, 唐霄汉, 何巍, 栾宇, 柳海龙, Hao, Peng.弹簧组件对大型弹性整流罩分离动力学的影响[J],固体火箭技术,2015,38(3):326-331
- [63]Li, Rui, Wang, Bo, Gang, Du, Jiahui, An, Xiaoting, R (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Analytic free vibration solutions of rectangular thin plates point-supported at a corner[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2015,96-97:199-205
- [64]Li, Gang, Meng, Zeng, Hu, Hao, G (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..An adaptive hybrid approach for reliability-based design optimization[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2015,51(5):1051-1065
- [65]孙文杰, 李刚, Li, G., State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of TechnologyChina.锻造操作机机构受力性能的多目标优化设计[J],计算力学学报,2015,32(2):143-148
- [66]Li Gang, Jiang Yi, Zhang Shuchuan, Zeng Yan, Li Qiang, Li, G (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Seismic design or retrofit of buildings with metallic structural fuses by the damage-reduction ...[J],EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION,2015,14(1):85-96
- [67]关晓, 李刚, 汤禹成, 李薇.基于设计结构矩阵的辅助优化系统[J],计算机辅助工程,2015,24(1):57-62
- [68]Li, Rui, Wang, Bo, Gang, R (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China..Benchmark bending solutions of rectangular thin plates point-supported at two adjacent corners[J],APPLIED MATHEMATICS LETTERS,2015,40:53-58
- [69]曾岩, 李刚.非高斯随机噪声与周期力相互作用下两种群 Lotka-Volterra 竞争模型随机响应分析[A],2015
- [70]曾岩, 李刚, 张有为, 郝鹏.Effects of Hysteretic Base Isolation on Rocking Motion of Self-Centering Rigid Body under Non-Gau...[A],2015
- [71]李刚, 郝鹏.A hybrid chaos control approach of the performance measure functions for reliabilisty-based desig...[J],Computers & Structures,2015,146(1)
- [72]郝鹏, 王博, 李刚.Reliability-based optimum design of stiffened panels under multi-source uncertainties[A],2015
- [73]郝鹏, 王博, 李刚, 唐霄汉, 曾杜娟, 莫怡华, Wang, Bo.T型截面多级加筋柱壳的缺陷敏感性及优化研究[J],工程力学,2015,32(8):223
- [74]李刚, 孟增.基于RBF神经网络模型的结构可靠度优化方法[J],应用数学和力学,2014,35(11):1271-1279
- [75]Wang Bo, Hao Peng, Li Gang, Wang XiaoJun, Tang XiaoHan, Luan Yu, Hao, P (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Generatrix shape optimization of stiffened shells for low imperfection sensitivity[J],SCIENCE CHINA-TECHNOLOGICAL SCIENCES,2014,57(10):2012-2019
- [76]Hao, Peng, Wang, Bo, Li, Gang, Meng, Zeng, Tian, Kuo, Tang, Xiaohan, B (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Hybrid optimization of hierarchical stiffened shells based on smeared stiffener method and fini...[J],THIN-WALLED STRUCTURES,2014,82:46-54
- [77]Hao, Peng, Wang, Bo, Li, Gang, Meng, Zeng, Tian, Kuo, Zeng, Dujuan, Tang, Xiaohan, B (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Worst Multiple Perturbation Load Approach of stiffened shells with and without cutouts for impr...[J],THIN-WALLED STRUCTURES,2014,82:321-330
- [78]Wang, Bo, Hao, Peng, Li, Gang, Tian, Kuo, Du, Kaifan, Xiaojun, Zhang, Xi, Tang, Xiaohan, G (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Two-stage size-layout optimization of axially compressed stiffened panels[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2014,50(2):313-327
- [79]Wang, Bo, Hao, Peng, Li, Gang, Zhang, Jia-Xin, Du, Kai-Fan, Tian, Kuo, Xiao-Jun, Tang, Xiao-Han, G (reprint author), Dalian Univ Technol, Dept Engn Mech, State Key Lab Struct Anal Ind Equipment, Dalian 116023, Peoples R China..Optimum design of hierarchical stiffened shells for low imperfection sensitivity[J],ACTA MECHANICA SINICA,2014,30(3):391-402
- [80]孙文杰, 李刚, Li, Gang.基于综合操作性能指标的操作机多目标优化[J],机械工程学报,2014,50(17):52-60