Hits:

Indexed by:期刊论文

Date of Publication:2019-03-14

Journal:JOURNAL OF MATERIALS CHEMISTRY A

Included Journals:SCIE、EI

Volume:7

Issue:10

Page Number:5402-5408

ISSN No.:2050-7488

Key Words:Carbon carbon composites; Flue gases; Gas adsorption; Nanocomposites; Porous materials; Surface chemistry, Adsorbate interactions; Adsorption capacities; Adsorption technology; Carbon composites; Carbon framework; Elevated temperature; Fabrication strategies; High adsorption capacity, Carbon dioxide

Abstract:Development of porous sorbents that can selectively capture carbon dioxide (CO2) through adsorption technology from the flue gas is essential to reduce emission of CO2 to the atmosphere. However, under typical flue gas conditions (approximate to 0.15 bar of CO2 at 40-70 degrees C), the adsorption capacity and selectivity for CO2 over those for nitrogen (N-2) remain poor on traditional porous adsorbents due to weak adsorbent-adsorbate interactions. Here, we report the synthesis of hierarchically structured porous carbon composites via an interfacial assembling strategy using nanoclay LAPONITE (R), resorcinol and formaldehyde as the precursors. This fabrication strategy allows fine tuning of the surface chemistry and pore network of porous carbons with the aim of enhancing the CO2 capture capacity at elevated temperatures (e.g., 50-150 degrees C). The obtained carbon composites reach a record-high CO2/N-2 selectivity (114.3) at 70 degrees C, according to equilibrium gas adsorption analysis and dynamic breakthrough measurement associated with a high adsorption capacity of 1.7 mmol g(-1) at 1.1 bar and 70 degrees C, and 0.5 mmol g(-1) at 0.17 bar and 70 degrees C. The inorganic substance integrated 3D carbon framework is responsible for such superior CO2 capture at 70 degrees C by enhancing adsorbent-adsorbate interactions.