于雁云

个人信息Personal Information

副教授

博士生导师

硕士生导师

任职 : 船舶与海洋工程设计研究所所长

性别:男

毕业院校:大连理工大学

学位:博士

所在单位:船舶工程学院

学科:船舶与海洋结构物设计制造

联系方式:yuyanyun@dlut.edu.cn

电子邮箱:yuyanyun@dlut.edu.cn

扫描关注

论文成果

当前位置: 于雁云 >> 科学研究 >> 论文成果

An approach to estimating the boil-off rate of LNG in type C independent tank for floating storage and regasification unit under different filling ratio

点击次数:

论文类型:期刊论文

发表时间:2018-05-05

发表刊物:APPLIED THERMAL ENGINEERING

收录刊物:SCIE、EI

卷号:135

页面范围:463-471

ISSN号:1359-4311

关键字:BOR; LNG; BOG; Filling ratio; FSRU

摘要:The alternative terminal Floating Storage and Regasification Unit (FSRU) for gas storage and vaporization is rapidly expanding all over the world. FSRU with great storage capacity and long storage time is faced with the continually evaporation of liquefied natural gas (LNG), which result in the decrease of filling ratio. In order to improving the efficiency of electricity generation and utilization of the Boil-off Gas (BOG), accurate and efficient method to estimate the BOR under different filling ratio is in demand. An equivalent conductive model with the combination of adjacent fluid layer and flowing BOG is proposed in this paper to handle the complex convection from the multiphase simulation. Testified by experimental measurement, the highest relative error for BOR estimation is less than 4%, and also the heat transferred by evaporation can be estimated accurately under different filling ratio. With the valid temperature distribution got from this model, the initial condition of transient simulation under specific filling ratio can be given rapidly for further study. Furthermore, the comparison between numerical results and experimental measurement also reveals that the majority of heat is transferred from bulkhead during evaporation under lower filling ratio. Finally, the proposed approach is successfully applied for a case of 30,000 m(3) FSRU, and proved to be a valid option to calculate BOR in the engineering field.