Release Time:2022-09-28  Hits:

Date of Publication: 2018-01-01

Journal: 复合材料学报

Institution: 机械工程学院

Volume: 35

Issue: 8

Page Number: 2023-2031

ISSN: 1000-3851

Abstract: In order to diminish drilling damage of glass fiber reinforced polypropylene composite (GF/PP) and improve its drilling efficiency, thrust force and outlet temperature during drilling GF/PP composites for various feed rates were measured by drilling experiments, and outlet processes of drilling were instituted observed with high-speed photography equipment. Outlet material removal process and damage mechanisms were demonstrated. Effect of feed rates on GF/PP composites drilling damage was analyzed. The results show that the outlet drilling temperature is high with low feed rates and becomes relatively steady as feed rates increasing; Outlet tearing is mainly outlet damage and caused by the tearing of large burrs by the cutting edges; It becomes severe with a too high or low feed rate. 0° burr is serious with low feed rates; Inlet tearing is serious with high feed rates. © 2018, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.

Note: 新增回溯数据