![]()
王福吉
-
教授
博士生导师
硕士生导师
- 任职 : 辽宁省先进复合材料高性能制造重点实验室主任
- 性别：男
- 毕业院校：大连理工大学
- 学位：博士
- 所在单位：机械工程学院
- 学科：机械电子工程. 机械制造及其自动化
- 办公地点：知方楼7059
- 联系方式：办公电话：0411-84707743，qq：66894581
- 电子邮箱：wfjsll@dlut.edu.cn
访问量：
-
[321] Wang, Fuji, Xiaonan, Yang, Rui, Gao, Hanqing, Su, Youliang, Bi, Guangjian, FJ (reprint author), Dalian Univ Technol, Dept Mech Engn, Dalian 116024, Peoples R China..Research on the carbon fibre-reinforced plastic (CFRP) cutting mechanism using macroscopic and mic[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2017,36(8):555-562
-
[322] 贾振元, 王福吉, 牛斌.The effect of interaction between titanium alloy and CFRP on the interface damage in cutting Ti/CFRP[A],2017
-
[323] 王福吉, 贾振元, 牛斌, 马建伟.Modelling of Cutting Induced Heat Partition for CFRP Composites[A],2017
-
[324] 王福吉, 贾振元.Numerical simulation of drilling carbon fiber reinforced plastics in the macroscopic and microscopic[A],2017
-
[325] 王福吉, 牛斌, 孙士勇.Numerical Analysis of The Effects of Cutting Parameters on the Sub-Surface damage in Machinning of[A],2017
-
[326] 贾振元, 王福吉, 牛斌.Prediction and investigation of thrust force in drilling CFRP composites with double point angle dri[A],2017
-
[327] 王福吉, 马建伟, 贾振元, 牛斌.Effects of cutting edge radius and fiber cutting angle on the cutting-induced surface damage formati[J],The International Journal of Advanced Manufacturing Technology,2017,91(9-12):3107-3120
-
[328] 贾振元, 王福吉.Design of a New One Shot Tool with Double Margins Structure in Drilling Titanium Composite Stacks[A],2017
-
[329] Jia, Zhenyuan, Fu, Rao, Niu, Bin, Qian, Baowei, Bai, Yu, Wang, Fuji, B (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Novel drill structure for damage reduction in drilling CFRP composites[J],INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE,2016,110:55-65
-
[330] Ma, Jian-Wei, Wang, Fu-Ji, Jia, Zhen-Yuan, Gao, Yuan-Yuan, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Machining Parameter Optimization in High-Speed Milling for Inconel 718 Curved Surface[J],MATERIALS AND MANUFACTURING PROCESSES,2016,31(13):1692-1699
-
[331] Yang, Jinghao, Jia, Zhenyuan, Liu, Wei, Fan, Chaonan, Wang, Fuji, Yang, Xu, Pengtao, W (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, 2 Linggong Rd, Dalian 116024, Peoples R China..Precision calibration method for binocular vision measurement systems based on arbitrary translati[J],MEASUREMENT SCIENCE AND TECHNOLOGY,2016,27(10)
-
[332] 殷俊伟, 贾振元, 王福吉, 陈晨, 张博宇, Wang, Fuji(wfjsll@dlut.edu.cn).基于CFRP切削过程仿真的面下损伤形成分析[J],机械工程学报,2016,52(17):58-64
-
[333] Ning, Fuda, Cong, Weilong, Jia, Zhenyuan, Wang, Fuji, Zhang, Meng.ADDITIVE MANUFACTURING OF CFRP COMPOSITES USING FUSED DEPOSITION MODELING: EFFECTS OF PROCESS PARA[A],2016,3
-
[334] Niu, Bin, Su, Youliang, Wang, Fuji, Yang, Rui, Sun, Shiyong.Characterization of dynamic forces in orthogonal cutting of CFRP[A],2016
-
[335] Su, Youliang, Wang, Fuji, Jia, Zhenyuan, Yin, Junwei, Fu, Rao, Niu, Bin, Liu, Wei.Effect of the ratio of cutting depth to edge diameter on chip formation mechanism in machining of CF[A],2016
-
[336] Fu, Rao, Jia, Zhenyuan, Wang, Fuji, Su, Youliang, Yin, Junwei, Niu, Bin, Liu, Wei.Design of a new tool with intermittent-sawtooth structure for damage reduction in drilling of CFRP c[A],2016
-
[337] Ma, Jian-wei, Jia, Zhen-yuan, Wang, Fu-ji, Gao, Yuan-yuan, Liu, Zhen, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116023, Peoples R China..A new cutting force modeling method in high-speed milling of curved surface with difficult-to-mach[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,84(9-12):2195-2205
-
[338] Gao, Yuan-yuan, Ma, Jian-wei, Jia, Zhen-yuan, Wang, Fu-ji, Si, Li-kun, Song, De-ning, JW (reprint author), Dalian Univ Technol, Sch Mech Engn, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Tool path planning and machining deformation compensation in high-speed milling for difficult-to-m[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,84(9-12):1757-1767
-
[339] 贾振元, 何春伶, 付饶, 王福吉, 王小楠, 钱宝伟, Wang, Fuji(wfjsll@dlut.edu.cn).基于CFRP层合板钻削轴向力时变曲线的钻头几何形状分析[J],复合材料学报,2016,33(12):2757-2765
-
[340] 杨景豪, 刘巍, 刘阳, 王福吉, 贾振元, Liu, Wei(lw2007@dlut.edu.cn).双目立体视觉测量系统的标定[J],光学精密工程,2016,24(2):300-308
