大连理工大学主页平台管理系统郭晓光--中文主页--论文成果

个人信息

MORE +

郭晓光Maggie Guo

(教授)

博士生导师硕士生导师
学位：博士
性别：女
毕业院校：大连理工大学
所在单位：机械工程学院
电子邮箱：guoxg@dlut.edu.cn

同专业博导

同专业硕导

个人学术主页

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

袁菘, 郭晓光, 李鹏辉, 毛茜, 鹿猛刚, 金洙吉, 康仁科, 郭东明.Insights into the surface oxidation modification mechanism of nano-diamond: An atomistic understa...[J],Applied Surface Science,2021,540
Zhang, Shuohua, 郭晓光, 金洙吉, 康仁科, 郭东明, Tang, William C..Surface morphologies and corresponding hardness evolution during nanoscratching[J],JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2021,9(3):3179-3189
袁菘, 郭晓光, 毛茜, 郭江, Van Duin, 金洙吉, 康仁科, 郭东明.Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF s...[J],International Journal of Mechanical Sciences,2021,191
郭晓光, Li, Qiang, Liu, Tao, Zhai, Changheng, 康仁科, 金洙吉.Molecular dynamics study on the thickness of damage layer in multiple grinding of monocrystalli...[J],MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2021,51:15-19
郭江, Pan Bo, 王斌, Yu Nan, 郭晓光, 康仁科.A new method for edge collapse prevention in fixed-abrasive lapping[A],2021,101-102
郭晓光, 李明, 罗熙春, 翟锐峰, 康仁科, 金洙吉, 郭东明.Smoothed-particle hydrodynamics investigation on brittle-ductile transition of quartz glass in si...[J],Nanomanufacturing and Metrology,2021,3:299-306
李子源, 高尚, 康仁科, 李洪刚, 郭晓光.A comparative study of lapping and grinding induced surface/subsurface damage of silicon wafers a...[J],International Journal of Abrasive Technology,2021,10(2):122-133
郭晓光, 王晓丽, 袁菘, 李阳, 康仁科, 金洙吉.Study on grinding damage of high chromium alloy based on molecular dynamics[J],International Journal of Nanomanufacturing,2021,16(4):328-339
郭晓光, 袁菘, 李阳, 金洙吉, 康仁科, 高航.Investigation on residual stress of high chromium alloy in mechanical process based on molecular ...[A],2021,428-431
鹿猛刚, 郭晓光, 袁菘, 金洙吉, 康仁科, 郭东明.Effects of heat treatment in air environment on the dispersivity of nanodiamond[A],2021
郭晓光, 王晓丽, 康仁科, 金洙吉, 罗熙淳.Influence of Tool Wear on the Cutting Mechanism of Single Point Diamond Turning of Silicon[J],Journal of Materials Science & Engineering,2021,38(3):355-362
Guo, Xiaoguang, Li, Yang, Cai, Linquan, Jiang, Kang, Renke, Jin, Zhuji, Dongming, Y (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Effects of tool edge radius on chip formation during the micromachining of pure iron[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,108(7-8):2121-2130
Yuan, Song, Guo, Dongming, Xiaoguang, Huang, Junxin, Gou, Yonjun, Jin, Zhuji, Kang, Renke, XG (reprint author), Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China..Insight into the mechanism of low friction and wear during the chemical mechanical polishing pr...[J],TRIBOLOGY INTERNATIONAL,2020,148
袁菘, 郭东明, 郭晓光, 金洙吉, 康仁科.金刚石化学机械抛光研究现状[J],表面技术,2020,49(4):11-22
史卓颖, 金洙吉, 郭晓光, 袁菘, 郭江.Insights into the atomistic behavior in diamond chemical mechanical polishing with OH environment...[J],Computational Materials Science,2019,166:136-142
郭晓光, 陈冲, 康仁科, 金洙吉.Study of mechanical properties and subsurface damage of quartz glass at high temperature based on...[J],Journal of Micromechanics and Molecular Physics,2019

共96条 1/6

首页上页下页尾页页

首页

科学研究

教学研究

获奖信息

招生信息

学生信息

我的相册

教师博客

个人信息

郭晓光Maggie Guo

同专业博导

同专业硕导

个人学术主页

论文成果

袁菘, 郭晓光, 李鹏辉, 毛茜, 鹿猛刚, 金洙吉, 康仁科, 郭东明.Insights into the surface oxidation modification mechanism of nano-diamond: An atomistic understa...[J],Applied Surface Science,2021,540

Zhang, Shuohua, 郭晓光, 金洙吉, 康仁科, 郭东明, Tang, William C..Surface morphologies and corresponding hardness evolution during nanoscratching[J],JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2021,9(3):3179-3189

袁菘, 郭晓光, 毛茜, 郭江, Van Duin, 金洙吉, 康仁科, 郭东明.Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF s...[J],International Journal of Mechanical Sciences,2021,191

郭晓光, Li, Qiang, Liu, Tao, Zhai, Changheng, 康仁科, 金洙吉.Molecular dynamics study on the thickness of damage layer in multiple grinding of monocrystalli...[J],MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2021,51:15-19

郭江, Pan Bo, 王斌, Yu Nan, 郭晓光, 康仁科.A new method for edge collapse prevention in fixed-abrasive lapping[A],2021,101-102

郭晓光, 李明, 罗熙春, 翟锐峰, 康仁科, 金洙吉, 郭东明.Smoothed-particle hydrodynamics investigation on brittle-ductile transition of quartz glass in si...[J],Nanomanufacturing and Metrology,2021,3:299-306

李子源, 高尚, 康仁科, 李洪刚, 郭晓光.A comparative study of lapping and grinding induced surface/subsurface damage of silicon wafers a...[J],International Journal of Abrasive Technology,2021,10(2):122-133

郭晓光, 王晓丽, 袁菘, 李阳, 康仁科, 金洙吉.Study on grinding damage of high chromium alloy based on molecular dynamics[J],International Journal of Nanomanufacturing,2021,16(4):328-339

郭晓光, 袁菘, 李阳, 金洙吉, 康仁科, 高航.Investigation on residual stress of high chromium alloy in mechanical process based on molecular ...[A],2021,428-431

鹿猛刚, 郭晓光, 袁菘, 金洙吉, 康仁科, 郭东明.Effects of heat treatment in air environment on the dispersivity of nanodiamond[A],2021

郭晓光, 王晓丽, 康仁科, 金洙吉, 罗熙淳.Influence of Tool Wear on the Cutting Mechanism of Single Point Diamond Turning of Silicon[J],Journal of Materials Science & Engineering,2021,38(3):355-362

袁菘, 郭东明, 郭晓光, 金洙吉, 康仁科.金刚石化学机械抛光研究现状[J],表面技术,2020,49(4):11-22

史卓颖, 金洙吉, 郭晓光, 袁菘, 郭江.Insights into the atomistic behavior in diamond chemical mechanical polishing with OH environment...[J],Computational Materials Science,2019,166:136-142

郭晓光, 陈冲, 康仁科, 金洙吉.Study of mechanical properties and subsurface damage of quartz glass at high temperature based on...[J],Journal of Micromechanics and Molecular Physics,2019

个人信息

郭晓光Maggie Guo

同专业博导

同专业硕导

个人学术主页

论文成果

袁菘, 郭晓光, 李鹏辉, 毛茜, 鹿猛刚, 金洙吉, 康仁科, 郭东明.Insights into the surface oxidation modification mechanism of nano-diamond: An atomistic understa...[J],Applied Surface Science,2021,540

Zhang, Shuohua, 郭晓光, 金洙吉, 康仁科, 郭东明, Tang, William C..Surface morphologies and corresponding hardness evolution during nanoscratching[J],JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&amp;T,2021,9(3):3179-3189

袁菘, 郭晓光, 毛茜, 郭江, Van Duin, 金洙吉, 康仁科, 郭东明.Effects of pressure and velocity on the interface friction behavior of diamond utilizing ReaxFF s...[J],International Journal of Mechanical Sciences,2021,191

郭晓光, Li, Qiang, Liu, Tao, Zhai, Changheng, 康仁科, 金洙吉.Molecular dynamics study on the thickness of damage layer in multiple grinding of monocrystalli...[J],MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING,2021,51:15-19

郭江, Pan Bo, 王斌, Yu Nan, 郭晓光, 康仁科.A new method for edge collapse prevention in fixed-abrasive lapping[A],2021,101-102

郭晓光, 李明, 罗熙春, 翟锐峰, 康仁科, 金洙吉, 郭东明.Smoothed-particle hydrodynamics investigation on brittle-ductile transition of quartz glass in si...[J],Nanomanufacturing and Metrology,2021,3:299-306

李子源, 高尚, 康仁科, 李洪刚, 郭晓光.A comparative study of lapping and grinding induced surface/subsurface damage of silicon wafers a...[J],International Journal of Abrasive Technology,2021,10(2):122-133

郭晓光, 王晓丽, 袁菘, 李阳, 康仁科, 金洙吉.Study on grinding damage of high chromium alloy based on molecular dynamics[J],International Journal of Nanomanufacturing,2021,16(4):328-339

郭晓光, 袁菘, 李阳, 金洙吉, 康仁科, 高航.Investigation on residual stress of high chromium alloy in mechanical process based on molecular ...[A],2021,428-431

鹿猛刚, 郭晓光, 袁菘, 金洙吉, 康仁科, 郭东明.Effects of heat treatment in air environment on the dispersivity of nanodiamond[A],2021

郭晓光, 王晓丽, 康仁科, 金洙吉, 罗熙淳.Influence of Tool Wear on the Cutting Mechanism of Single Point Diamond Turning of Silicon[J],Journal of Materials Science &amp; Engineering,2021,38(3):355-362

袁菘, 郭东明, 郭晓光, 金洙吉, 康仁科.金刚石化学机械抛光研究现状[J],表面技术,2020,49(4):11-22

史卓颖, 金洙吉, 郭晓光, 袁菘, 郭江.Insights into the atomistic behavior in diamond chemical mechanical polishing with OH environment...[J],Computational Materials Science,2019,166:136-142

郭晓光, 陈冲, 康仁科, 金洙吉.Study of mechanical properties and subsurface damage of quartz glass at high temperature based on...[J],Journal of Micromechanics and Molecular Physics,2019

Zhang, Shuohua, 郭晓光, 金洙吉, 康仁科, 郭东明, Tang, William C..Surface morphologies and corresponding hardness evolution during nanoscratching[J],JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2021,9(3):3179-3189

郭晓光, 王晓丽, 康仁科, 金洙吉, 罗熙淳.Influence of Tool Wear on the Cutting Mechanism of Single Point Diamond Turning of Silicon[J],Journal of Materials Science & Engineering,2021,38(3):355-362