Release Time:2019-03-14  Hits:

Indexed by: Journal Article

Date of Publication: 2005-06-01

Journal: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Included Journals: EI、SCIE、Scopus

Volume: 36A

Issue: 6

Page Number: 1439-1446

ISSN: 1073-5623

Abstract: Effects of minor additions of Cu, Bi, and In on microstructure, melting temperature, and tensile properties of Sn-Ag-based lead-free solders were investigated. It was found that the intermetallic compounds (IMCs) Ag2In and Cu6Sn5 are formed in In- and Cu-containing solders, respectively. At low concentration, Bi dissolved in the Sn matrix and tended to precipitate pure Bi particles at the solubility limit of 4 wt pct Bi. The formation of large Ag3Sn precipitates from the solder matrix was suppressed when alloying bismuth into the Sn-Ag alloy. The Bi addition resulted in a significant linear increase of the ultimate tensile strength (UTS) of solders, which is attributed to a solid-solution hardening mechanism. Solder strengthening due to In and Cu is less pronounced and attributed to a dispersion strengthening mechanism. The additions of Cu, Bi, and In all depressed the melting temperatures of Sn-Ag-based solders; however, In is the most effective one.